car won't start!!!(sometimes)

Burn N' Up · 04-15-2006, 04:05 PM

Anyone else thinking cold start injector? Sounds very likely.... Does the car start easily once warm?

supfoo514 · 04-22-2006, 09:52 PM

sorry for the late reply, been kind of busy lately.
to answer your question, the car does usually start easily after warm but on the day i posted this problem, the car just seemed not to start everytime i tryed to turn it on no matter how warm or cold the engine is. Also this problem has seemed to remedied itself without me doing anything so i don't really know what's going on. It now turns on pretty easily. Not sure what the problem is or was but thanks for all the help!

Burn N' Up · 04-23-2006, 10:26 PM

I asked around, a friend of mine had the exact same problem, ended up being one of the starter wires, apparently the OEMs are a little weak for the voltage they are drawing.

supfoo514 · 04-24-2006, 03:14 AM

I see so just replace the wire and it should be good to go I assume? Thanks again!

04-22-2006, 09:52 PM	#2
supfoo514 Intake Join Date: Mar 2006 Location: San Francisco Posts: 41	sorry for the late reply, been kind of busy lately. to answer your question, the car does usually start easily after warm but on the day i posted this problem, the car just seemed not to start everytime i tryed to turn it on no matter how warm or cold the engine is. Also this problem has seemed to remedied itself without me doing anything so i don't really know what's going on. It now turns on pretty easily. Not sure what the problem is or was but thanks for all the help! __________________ 91 Turbo Automatic MKIII a.k.a "Sammie"

04-24-2006, 03:14 AM	#4
supfoo514 Intake Join Date: Mar 2006 Location: San Francisco Posts: 41	I see so just replace the wire and it should be good to go I assume? Thanks again! __________________ 91 Turbo Automatic MKIII a.k.a "Sammie"

04-15-2006, 04:05 PM	#1
Burn N' Up 3" Exhaust Join Date: Sep 2005 Posts: 238	Anyone else thinking cold start injector? Sounds very likely.... Does the car start easily once warm?

04-23-2006, 10:26 PM	#3
Burn N' Up 3" Exhaust Join Date: Sep 2005 Posts: 238	I asked around, a friend of mine had the exact same problem, ended up being one of the starter wires, apparently the OEMs are a little weak for the voltage they are drawing.