|
|
05-22-2007, 08:15 PM
|
#1 |
|
3" Exhaust
Join Date: Feb 2007
Location: Canada
Posts: 99
 |
""Off the top of my head...
First crack the lugs loose Jack the car Take the wheel off For the front--remove the brake hose from where it is mounted (I think it is a 10mm?) Unbolt the the lower part of the caliper from the bracket Lift the caliper up and then slide if off Remove brake pads Apply Brake Quiet to the backside of the pads, NOT the friction side (this keeps them from squeeling) Insert pads The rest is the reverse of taking them off. At least that is one version from memory""... Ok I am trying to change the brake pads and I got the hose bracket bolts off and the caliper bolt off the front but the caliper will not come off...I dont want to pull too hard and rip the hose....how do I get it off??
__________________
1987 N/A Targa 5 speed no mods as yet |
|
|
|
05-23-2007, 01:44 AM
|
#2 |
|
1000whp postwhore
Join Date: Jun 2005
Location: Mojave Desert, Calif.
Posts: 1,705
|
If you are JUST changing the pads, you just take the bottom bolt out, and swing the caliper up.
If you are gonna remove the rotor, you then have to take the 2 bolts out that hold the caliper mount bracket.
__________________
Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wilwood MKIII Rear brake kit | ARZ | Arizona Performance | 0 | 03-16-2007 07:46 AM |
Hybrid Mode
