Toyota Supra Forums! Join the Supra forum!

Toyota Supra Forums! Join the Supra forum! (http://www.toyota-supra.info/forums/)
-   MKIII Supra (http://www.toyota-supra.info/forums/mkiii-supra/)
-   -   Spoiler Suggestions? (http://www.toyota-supra.info/forums/mkiii-supra/3594-spoiler-suggestions.html)

TONY! 02-19-2006 05:06 PM

When I look at it, I feel like I want to sit down...probably because it looks like part of a picnic table.

KNYFE 02-19-2006 06:03 PM

Quote:

Originally Posted by rnoswal
I saw one made of 2x4's, yup wood, it was cheap and I guess the guy thought it looked good, but not anyone else unless he WAS going for the laugh.

Russ

I'm pretty sure he was going for a laugh. Was making fun of the ricer scene.

rnoswal 02-20-2006 12:31 AM

I'm sure you're right. It was on a redneck site with lots of funny stuff.........but still, you never know!!!!!!!!!!!!!!!!!!!!!!!...........lol


Russ

burton51m 02-20-2006 01:42 PM

and how much would it cost me to get this painted- http://www.jcwhitney.com/autoparts/P...010864/c-10114

burton51m 02-20-2006 11:49 PM

. . .and what would you do with the antenna? i have one with a motor in it would i just take it off and put it on top of the new wing? (of course in the slot pre-made in the spoiler..)

TONY! 02-21-2006 12:12 AM

I used to paint helmets and bikes for people and it is still hard for me to give you an estimate on painting it.
Depends on the condition of the part. Most times aftermarket parts have imperfect panels (from what I have seen).
Depends on the color (paint colors range in price).
Depends on who does it.

If it is ready for primer, it would be about $130 for me to prime it, paint it, and then clear it and that is with them buying the materials.

But I quit painting for people because too many in this area want everything to be show quality, while wanting to pay what averages out to be $5 an hour.
Anyways, I only have patience for my own stuff that I need painted...actually, I don't have enough for my own stuff.
I wish I could just buy patience...like patience pills. heheh



As far as the antenna, I would consider getting my Dremel out for that.
But you better make sure you can align the hole "on the money" but I don't think that would be too hard...
Just make a small hole in the spoiler piece over the center of the hole in the car body.
Then as you see where you need to Dremel more with the spoiler piece over the car body, Dremel it out until the wing hole is as exact as the hole below it....or matching it to the diameter of the antenna.

Got to always be creative when you do bodywork or custom painting.
Most of the time is spent on the boring stuff though like sanding.

j3pz 02-21-2006 06:23 PM

you could always get one of those hidden antennas, but im not sure of the quality of those. they normally run for about 30bucks. i dont think it hook up right the factory wiring but it wouldnt be that hard to do it.

1988gte 02-21-2006 10:01 PM

Quote:

Originally Posted by TONY!
burton51m,
You really can't beat what the designers came up with.
They designed the perfect spoiler for the MKIII.
Any step away from what they did, is a step away from perfection in my opinion.

Checked out your site--you have a really clean and classy looking car.
If I were you, I would not change a thing other than to get a MKIII '89-92 spoiler for it.
That and lose the sleepy eye deal (if I may say)...if you have not already.

All this car needs, IMO, is a stock 3pc wing:
http://memimage.cardomain.net/member...020_2_full.jpg

Shes one fine looking car

burton51m 07-10-2006 05:35 PM

1 Attachment(s)
Quote:

Originally Posted by TONY!
As far as the antenna, I would consider getting my Dremel out for that.
But you better make sure you can align the hole "on the money" but I don't think that would be too hard...
Just make a small hole in the spoiler piece over the center of the hole in the car body.
Then as you see where you need to Dremel more with the spoiler piece over the car body, Dremel it out until the wing hole is as exact as the hole below it....or matching it to the diameter of the antenna.


look at what i circled in blue in the pic. does that hole for the antenna come pre-drilled for the JC Whitney spoiler?

thanks for the pic aznboi2626

burton51m 07-14-2006 04:18 PM

ANYONE? preferably someone that has baught an aftermarket spoiler..

i really want to get this and know what i am getting..


All times are GMT. The time now is 06:20 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87