Head and Block Machined?? - Toyota Supra Forums

87supraturbo Head and Block Machined?? 02-01-2006, 08:12 AM

TONY! Prepping for a Metal Head... 02-01-2006, 08:33 AM

kewlcoconut im also in the process of... 02-01-2006, 09:27 AM

Strannik use copper spray and i would... 02-01-2006, 11:14 AM

rnoswal Almost no head gaskets... 02-01-2006, 02:06 PM

TONY! The Permatex Brake Quiet also... 02-02-2006, 03:47 AM

Idaho Hi, I apologiye for mz... 02-02-2006, 02:55 PM

kewlcoconut well, there is a company... 02-02-2006, 10:44 PM

TONY! Well the "Permatex Brake... 02-02-2006, 11:11 PM

mrnickleye Carefull, there are noobies... 02-02-2006, 11:26 PM

flight doc89 Oohhh.....THAT explains it... 02-03-2006, 01:38 AM

kewlcoconut errrrr sorry, thought i said... 02-03-2006, 01:48 AM

Idaho muhehe - good mention :) but... 02-06-2006, 06:51 AM

02-01-2006, 02:06 PM	#5
rnoswal Lexus & 550's Join Date: Apr 2005 Location: Bossier City LA Posts: 556	Almost no head gaskets require any adhesives at all. They are not recommended. If you need clamping power then go with ARP studs. Metal gaskets are usually only for the turbo engines. A FelPro head gasket works just fine in an N/A. If you do pull the engine, make sure you keep the front aluminum cover on the engine so it can be milled too. As I said before inanother posting. Don't worry about buying an extra thick headgasket either if it is a N/A engine. The extra compression helps and the cams are easy to retime with the adjuster holes in the cam gears. Russ

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are Off Refbacks are Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7MGTE block and head	TxSpeedBoy	Import Auto Center	4	07-01-2009 06:33 AM
7mgte head on 7mge block?	RCSG_MK	MKIII Supra	4	01-01-2008 02:01 PM
5M head onto 7M block	mattapo	MKII Supra	1	05-09-2007 03:49 AM
Head Gasket Part II	Bullz_EyE	MKIII Supra	2	01-26-2006 06:30 PM
Milling head and/or block	kazam	Non-Generation Specific Questions	0	07-31-2005 11:19 PM

All times are GMT. The time now is 10:18 PM.