01-26-2006, 12:20 PM | #1 |
Stock
Join Date: Jul 2005
Posts: 10
|
Just got my new MA70!
Hey supra ppls i just landed my new MA70 and have just got it passed through local transport registration and compliance. danm it was a nightmere to pass as these government compliance officers no nuthing bout how good our jap imports are.
It seems to have a fair bit spent on it in japan. Most things are HKS or Greddy on it. ;-) Its a very clean example full leather interior with Pioneer GPS and TV. the only interior mods are the Stabilzer bars runnin along the B billers near the seatbelt bolts. It is black and has BBS wheels, bilstein coilovers, engine has Forgies and metal head gasket, it has HKS TG04E turbo and a few other mods like R33 alli Radiator and nissan 345mm front rotors and calipers, additional Greddy injectors, about 6 HKS guagues, top and bottom strut braces ect. Plenty of stuff on the mod sheet but u cant always trust the auctions words. The part im worried about is that it has come with a HKS F CON PRO V ecu but its not connected and the car is running on std chip with full air flow metre. The full loom for the F com is all there but its just not all wired to work properly. The car is almost impossible to drive without engine managment... its got all these goodies and still isnt running as good as my baby GA70 with 166 rear kw. ;-) IS there a way of getten my HKS F CON PRO V working and where do I get the software to pass on to my tuner??? Where would be the best place to start? ive attached a pic of us slaving over this car for fun. ;-P http://www.toyota-supra.info/forums/...ntid=166&stc=1 Cheers in advance. Baz
__________________
Cheers Azzurro 1989 MK III 1G SUPRA HKS Intake, HKS Exhuast, HKS SS BOV, Custom FMIC, Front Pipe, Reco Turbos, 19" Zanetties, 45mm Lowered Coils, Dyno 156rwkw @ 10-14psi, Stock internals and EcU Also NEW MA70 car yet to discover wat its on about |
01-26-2006, 01:18 PM | #2 |
3" Exhaust
Join Date: Oct 2005
Posts: 169
|
Good!
Sounds pretty good!
What could your 1G supra do in a 1/4 mile run? Just out of curiosity. It has the stock HP @ the flywheel but @ the wheels, heh.
__________________
'88 N/A automatic, looks, runs and feels like NEW! |
01-26-2006, 01:44 PM | #3 |
Stock
Join Date: Jul 2005
Posts: 10
|
havnt had much time to run it at the local off steet drags im gonna sell it once the MA70 is up and running with the F con Pro V tuned up.
Id hope it would run something in the low 14's but who knows. They are lighter than the MA70 with its narrower track and lighter engine so maybe less. I been so busy organising compliance with the Ma70 so i havent had much time for the baby GA... hope the pic workd.
__________________
Cheers Azzurro 1989 MK III 1G SUPRA HKS Intake, HKS Exhuast, HKS SS BOV, Custom FMIC, Front Pipe, Reco Turbos, 19" Zanetties, 45mm Lowered Coils, Dyno 156rwkw @ 10-14psi, Stock internals and EcU Also NEW MA70 car yet to discover wat its on about |
01-27-2006, 08:36 AM | #4 |
Stock
Join Date: Jul 2005
Posts: 10
|
Bump! Bump!
Hey guys any body know any thing about the F CON PRO V?? ;-(
__________________
Cheers Azzurro 1989 MK III 1G SUPRA HKS Intake, HKS Exhuast, HKS SS BOV, Custom FMIC, Front Pipe, Reco Turbos, 19" Zanetties, 45mm Lowered Coils, Dyno 156rwkw @ 10-14psi, Stock internals and EcU Also NEW MA70 car yet to discover wat its on about |
10-12-2006, 07:42 PM | #5 |
Stock
Join Date: Oct 2006
Location: benfleet essex
Posts: 1
|
just got my new ma70
some info on the f con v pro gold, my car is currently waiting for hks europe, to figure out the harness wiring, i have a number of mods, and bought the f con v pro gold, to replace the pfc f con as it isnt man enough, paul hills of engine advantages in witham essex,has had problems, and i have had to supply him with the ecu pin out for my car, there are as i have found, two types, one ecu pin out diagram had four connectors, and the other has 3 connectors, mine has the latter, they said the software isnt a problem, but its obviously crucial to get the loom right !! paul is on 01376 502522, and hks europe,01480 431604 gary. but give it a few days they are still trying to figure it out between them !! , but at least if any other 7m gte owner wants to fit the v pro gold, they shouldnt have the aggro i have !!, i have however the lex afm/air screw/550 injectors, and pfc f con for sale !! best offer over ?300 secures, 07881 906290 terry
Last edited by terry steward; 10-12-2006 at 07:44 PM. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ma70 & Jza80 | SilenceboneSupra | MKIII Supra | 6 | 11-24-2007 09:28 AM |
ma70 polyurethane subframe bushings | ronniek | MKIII Supra | 0 | 03-22-2007 07:04 AM |
Easy Question, Does the MA70 have alot of production line | changmeister88 | MKIII Supra | 1 | 03-13-2006 10:56 PM |