what kind of clutch do you recommend?

frankwhite · 12-26-2005, 11:12 PM

Im looking to spend around 300 give or take some, for the clutch kit. I was wondering how much i can expect to spend on labor since i dont know how to install it myself. How long should it take a certified mechanic to put my clutch in? I just dont wanna get ripped off. Thanks.

skunk · 12-27-2005, 07:04 PM

I think if you are going to up the power you need one of these....this is my next step

http://935motorsports.com/catalog/in...Path=79_14_148

frankwhite · 12-28-2005, 09:36 AM

Any suggestions on which one from the 935 motorsports page. Im lookin the spend 300-400 on kit.

joel w · 12-28-2005, 10:04 AM

Mine was slipping in 3rd 4th and 5th gears due to mods, so i went with a ebay XTD stage 3 pressure plate and disk but i had chatter and grabbing problems. so i took it apart and used a stock disk instead of the 6 puk and kept the stahe 3 pressure plate. I like it, its smooth like butta and no slipage under loads..

12-28-2005, 09:36 AM	#3
frankwhite Stock Join Date: Dec 2005 Posts: 7	which one Any suggestions on which one from the 935 motorsports page. Im lookin the spend 300-400 on kit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HElp with sports clutch!!	whitequasimodo	MKIII Supra	3	05-07-2008 11:06 PM
Clutch Troubleshooting	ivire	MKIII Supra	9	11-09-2006 01:29 AM

12-26-2005, 11:12 PM	#1
frankwhite Stock Join Date: Dec 2005 Posts: 7	Im looking to spend around 300 give or take some, for the clutch kit. I was wondering how much i can expect to spend on labor since i dont know how to install it myself. How long should it take a certified mechanic to put my clutch in? I just dont wanna get ripped off. Thanks.

12-27-2005, 07:04 PM	#2
skunk 3" Exhaust Join Date: Jun 2005 Location: southern oregon Posts: 133	I think if you are going to up the power you need one of these....this is my next step http://935motorsports.com/catalog/in...Path=79_14_148

12-28-2005, 10:04 AM	#4
joel w Lexus & 550's Join Date: Aug 2005 Location: In the shadows Posts: 506	Mine was slipping in 3rd 4th and 5th gears due to mods, so i went with a ebay XTD stage 3 pressure plate and disk but i had chatter and grabbing problems. so i took it apart and used a stock disk instead of the 6 puk and kept the stahe 3 pressure plate. I like it, its smooth like butta and no slipage under loads..