|
![]() |
#1 |
Stock
Join Date: Jun 2013
Location: Corvallis, Oregon
Posts: 2
![]() |
![]()
Me again. I realize you said you used the small paint brush, but it seems like it would be near impossible to get the sealant to the back side from where you stick your paint brush in. Did you just do it as much as you could, hoping it would wick to the backside? Or is there another trick? Thanks.
|
![]() |
![]() |
![]() |
#2 |
Bone Stock w Upgrades ;-)
Join Date: Apr 2010
Location: Tampa Bay
Posts: 213
![]() |
![]()
The sealant does wick into cracks just like water but when it dries it seals. The center square support is clearly visible in the photo. Just wet your brush and swab away. It's a good idea to pour some of the sealant into a smaller cup so you don't contaminate the bottle. Use a drop cloth so it doesn't get on your interior. The other 2 square supports can be seen if you look with a flashlight. Do the same thing and swab around where the metal and plastic meet. I used paper towels to check before and after for leaks or you could just leave the towels in there to catch any stray drops.
|
![]() |
![]() |
![]() |
|
|