7MGE Head Gasket Replacement

69ho · 08-22-2013, 06:03 PM

Thanks for the reply cre. I think I am going to come up with a way to machine the plate on the block. I think removing it and trying to match the profile will not be impossible, but difficult to setup. This engine has very few miles since the previous owner had it rebuilt(<5K) and it seals well. I think I will be asking for more trouble (leaks) removing the plate than trying to do it on the block. I plan on using a stock Toyota composite HG which as you said can tolerate minor imperfections. I will seal the corners as spelled out in the service manual. Thanks for letting me use you as a bouncing board, so to speak. It has helped me arrive at workable solution.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown Head Gasket?	BillW	MKIII Supra	5	09-17-2010 02:06 AM
Head Gasket Replacement	srausaf	MKIII Supra	1	07-23-2007 05:17 PM
Head Gasket replacement questions.	DavidLeClair584	MKIII Supra	1	06-09-2007 09:17 PM
1989 Supra Head Gasket Replacement	rayk5799	Non-Generation Specific Questions	1	08-30-2006 02:37 PM
7MGE - Stuck with changing Head Gasket???	pasupra	MKIII Supra	8	07-31-2006 10:41 AM

08-22-2013, 06:03 PM	#1
69ho Stock Join Date: Aug 2013 Location: Huntsville, AL Posts: 6	Thanks for the reply cre. I think I am going to come up with a way to machine the plate on the block. I think removing it and trying to match the profile will not be impossible, but difficult to setup. This engine has very few miles since the previous owner had it rebuilt(<5K) and it seals well. I think I will be asking for more trouble (leaks) removing the plate than trying to do it on the block. I plan on using a stock Toyota composite HG which as you said can tolerate minor imperfections. I will seal the corners as spelled out in the service manual. Thanks for letting me use you as a bouncing board, so to speak. It has helped me arrive at workable solution.