|
|
11-11-2013, 06:33 PM
|
#1 |
|
3" Exhaust
Join Date: Apr 2010
Location: Serbia
Posts: 51
 |
Problem is I have a leaking on a lever where the bolt is.could u help,the engine is on the rebulit now,thanks
|
|
|
|
11-13-2013, 01:45 AM
|
#2 |
 Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
 |
http://www.cygnusx1.net/Supra/Librar...spx?F=8716&P=1
So the lower part of 87240, where the two hoses meet, is leaking? If so then you just need to find a replacement. You can bypass that valve for the time being with a 90 degree pipe and your heat will work fine. Your air conditioning will also work with it bypassed but it won't get quite as cold.
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal.  Tip Jar --->  |
|
|
|
|
11-13-2013, 01:32 PM
|
#3 |
|
3" Exhaust
Join Date: Apr 2010
Location: Serbia
Posts: 51
|
yes betwen two hoses is plastic part or the valve with the lever on it with bolt there is the leak.So can I just remove it and put 90 degre hose for the time I find the replacment or must I replace it right away.
|
|
|
|
|
11-13-2013, 01:36 PM
|
#4 |
|
3" Exhaust
Join Date: Apr 2010
Location: Serbia
Posts: 51
|
And sorry if I ask but what is the purpose of it
|
|
|
|
|
11-14-2013, 01:34 AM
|
#5 |
|
Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
|
It's a bypass valve for the heater core. MOST of the time (except for when the AC is set on HI and when the car is warming up) it's open and allows coolant to flow through the heater core. Bypassing it will just keep coolant running through the heater core even when the car is still warming up and when the AC is set on HI. You probably won't notice a big difference except that it might take your car another minute or two longer to warm up.
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar ---> |
|
|
|
|
11-17-2013, 02:09 PM
|
#6 |
|
3" Exhaust
Join Date: Apr 2010
Location: Serbia
Posts: 51
|
Thank u very much for the info and can u post some pictures w/bypassed heater valve just for to be sure
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Won't suck the water from overflow | illusive38 | MKIII Supra | 7 | 05-24-2012 09:19 AM |
| water circulation problem | subjated | MKIII Supra | 3 | 06-07-2011 08:20 PM |
| water in the hatch problem | drod23 | MKIII Supra | 4 | 03-01-2011 06:37 PM |
| speed sensor problem | nadircicek | Non-Generation Specific Questions | 8 | 10-09-2009 05:58 PM |
| Bad Water Pump? | scruffboy | Non-Generation Specific Questions | 10 | 11-26-2006 04:37 PM |
Hybrid Mode
