Pillow ball top mounts.

Sonyps307 · 08-05-2012, 01:50 PM

Ok so I got all new suspension parts springs, shocks, upper and lower ball joints and bushings all around for my supra. Also will be lowering it with H&R spring with tokico blues. So the H&R's will lower the front by 1.6" and the rear by 1.3". So I'm asking will I need adjustable pillow ball top mount to get the camber back to stock so I don't get a lot of tire wear. But the problem is that I readed that the pillow balls give u harsh ride.

cre · 08-05-2012, 05:54 PM

There's a lot of room for adjustment in the MKIII and I know a lot of people who've run significant drops that didn't need additional hardware to get the camber dialed in. I think you should try it without them first.

Sonyps307 · 08-05-2012, 08:46 PM

Ok on that note I will just get some stock replacment top mounts and save some money. The suspension on my supra look to be original beside the front struts. Lol sound like I got basket balls in the rear when hitting bumps fast.

08-05-2012, 01:50 PM	#1
Sonyps307 Lexus & 550's Join Date: May 2010 Location: Baltimore Posts: 526	Pillow ball top mounts. Ok so I got all new suspension parts springs, shocks, upper and lower ball joints and bushings all around for my supra. Also will be lowering it with H&R spring with tokico blues. So the H&R's will lower the front by 1.6" and the rear by 1.3". So I'm asking will I need adjustable pillow ball top mount to get the camber back to stock so I don't get a lot of tire wear. But the problem is that I readed that the pillow balls give u harsh ride.

08-05-2012, 05:54 PM	#2
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	There's a lot of room for adjustment in the MKIII and I know a lot of people who've run significant drops that didn't need additional hardware to get the camber dialed in. I think you should try it without them first. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

08-05-2012, 08:46 PM	#3
Sonyps307 Lexus & 550's Join Date: May 2010 Location: Baltimore Posts: 526	Ok on that note I will just get some stock replacment top mounts and save some money. The suspension on my supra look to be original beside the front struts. Lol sound like I got basket balls in the rear when hitting bumps fast. Last edited by Sonyps307; 08-05-2012 at 11:35 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what size pickle fork opening for ball joint replacement	rjSupra	MKIII Supra	3	03-03-2011 11:17 PM
ball joints	jcastro	MKIII Supra	5	08-25-2010 04:15 PM
Tie Rods & Ball Joints	mrnickleye	MKIII FAQ	1	03-10-2007 04:50 AM
Motor Mounts	chrisr3344	MKIII Supra	1	01-30-2006 02:54 AM