Engine pulling help needed

cre · 02-06-2012, 01:55 AM

You most definitely need to move the engine back against the transmission...

This should not be as difficult as you're making it... You've gotta learn somehow but generally people suggesting you learn from their mistakes are suggesting it because, well, they've already made the same mistake.

I've worked in small garages before. Roll the car back a couple feet, pull engine and tranny in all of 30 minutes, lower engine and tranny so that tranny's resting on a tire or rolling stand, detach engine from tranny, put engine on engine stand, move hoist and tranny out of the garage, roll car back in in time for lunch.

Anyway, yes, move the engine back, pull the fork, slide the engine forward as straight as possible while the transmission is still attached; The input shaft is pretty beefy but it's always best to proceed with caution. Absolutely disconnect the driveshaft.

02-06-2012, 01:55 AM	#9
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	You most definitely need to move the engine back against the transmission... This should not be as difficult as you're making it... You've gotta learn somehow but generally people suggesting you learn from their mistakes are suggesting it because, well, they've already made the same mistake. I've worked in small garages before. Roll the car back a couple feet, pull engine and tranny in all of 30 minutes, lower engine and tranny so that tranny's resting on a tire or rolling stand, detach engine from tranny, put engine on engine stand, move hoist and tranny out of the garage, roll car back in in time for lunch. Anyway, yes, move the engine back, pull the fork, slide the engine forward as straight as possible while the transmission is still attached; The input shaft is pretty beefy but it's always best to proceed with caution. Absolutely disconnect the driveshaft. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!: 7MGTE engine block info needed	barton	MKIII Supra	1	05-19-2010 05:54 PM
HELP!: 7MGTE engine block info needed	barton	MKIII Supra	6	04-14-2010 09:28 PM
Well crap! Advice needed with shot engine	finaltable	MKIII Supra	10	03-13-2008 07:35 PM
change oil pump without pulling engine	Jjona5	MKIII Supra	2	02-11-2007 03:29 AM
Pulling Engine and trans	adamh88	MKIII Supra	3	01-15-2007 05:36 PM