will 9" rims fit

cre · 02-04-2012, 01:22 AM

H&R racing springs only drop a bit over an inch and a half... unless they're old, sagging or you have a massive rear end. 1.6" front and 1.3 rear is what they say and the last person I knew who had a set measured about 1.75" in the front after 2 years on them. You on different size tires or non-OEM dampers? Different perch height or tire profile would account for the offset you're seeing.

Anyway, whether they'll fit or not is going to depend more on the offset than the tire size. 255's will fit comfortably on a mildly lowered MKIII and I suspect they'll fit fine on a slammed MKIII but may require rolling the fenders. Look in the tire fitment thread in the MKIII FAQ section, someone may have posted more first hand info.

So, I take it it's on either cut springs or coil overs... Have any pics? I've only ever seen one completely slammed MKIII (I think around a 4" drop) but his front weels were turned when he hit a small speed bump and it sucked the driver's side fender into the wheel well and pushed the passenger side out.... not a good example.

02-04-2012, 01:22 AM	#3
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	H&R racing springs only drop a bit over an inch and a half... unless they're old, sagging or you have a massive rear end. 1.6" front and 1.3 rear is what they say and the last person I knew who had a set measured about 1.75" in the front after 2 years on them. You on different size tires or non-OEM dampers? Different perch height or tire profile would account for the offset you're seeing. Anyway, whether they'll fit or not is going to depend more on the offset than the tire size. 255's will fit comfortably on a mildly lowered MKIII and I suspect they'll fit fine on a slammed MKIII but may require rolling the fenders. Look in the tire fitment thread in the MKIII FAQ section, someone may have posted more first hand info. So, I take it it's on either cut springs or coil overs... Have any pics? I've only ever seen one completely slammed MKIII (I think around a 4" drop) but his front weels were turned when he hit a small speed bump and it sucked the driver's side fender into the wheel well and pushed the passenger side out.... not a good example. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
the weight of rims?	rinso	Non-Generation Specific Questions	3	03-28-2007 10:38 AM
Rims and Tyres	Ice	Non-Generation Specific Questions	1	08-07-2006 03:58 PM
Paint Job And Rims	Sever_13_	Exterior , Interior, and Detailing	6	07-19-2006 02:25 AM
Question about RIMS!	lifesnotfair	Off Topic Forum	2	12-09-2005 03:33 PM
rims for my mk2 supra	Guest	MKII Supra	1	06-01-2005 08:03 AM