![]() |
#2 |
![]() Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
First off, you can not set the timing is ANY codes are stored in the ECU. Make sure it's clear first.
Second, base timing is 10?BTDC, not 15?. Third, with the diagnostic jumper in place the ECU runs by a very strict base timing map; Out of diagnostic mode many factors cause shifts in the timing and timing is at no point static (in other words it's constantly changing). Fourth, turn the car OFF before removing/inserting the diagnostic jumper. Trying to switch back and forth while the ECU is powered may yield unpredictable results or even cause damage to the ECU. Fifth, the vehicle needs to be up to normal operating temperature before setting the ignition advance. Sixth, have you verified that the mechanical timing is correct? Seventh..... There's nothing I hate more than fixing someone else's poor swap... Welcome to Hell.
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. ![]() Tip Jar ---> ![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
7mge hp increase info | 907mge | MKIII Supra | 14 | 02-05-2011 03:03 AM |
7MGTE to 7MGE | karu | MKIII Supra | 4 | 10-22-2010 07:22 AM |
7MGE Head Swap | 7MGTE87 | MKIII Supra | 3 | 03-27-2010 06:39 AM |
4runner 7MGE swap idle problem | grabber | MKIII Supra | 3 | 06-26-2008 11:45 PM |
2006 Toyota 4Runner | silly | Off Topic Forum | 1 | 07-07-2006 06:52 PM |