10-28-2011, 10:40 PM
|
#2 |
 Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
  |
They're all clocked differently (have the wastegate mounted to different bosses on the housing and the compressor and/or exhaust are rotated at a different angle) and most have a different downpipe flange (size and bolt pattern). While a couple are interchangeable between vehicles I don't believe any of them is a direct bolt on to the stock 7M setup.
The 7M-GTE has oil squirters to cool the pistons (you can't add them to the GE) and different pistons for a lower compression ratio. The differences are well documented on the forum already, please use the search feature and look in the MKIII FAQ section.
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal.  Tip Jar --->  |
|
|
|
|
Threaded Mode