LED Tail lights and Blinker questions

Sonyps307 · 09-08-2011, 11:21 PM

I would like to get real headlight housing. but I forgot the company that made them and where to get them. I know u already said the company on another headlight post but I can't find that also.

cre · 09-09-2011, 02:29 AM

The best housing would be the Cibie ECE (E-code) compliant housings, then Hella's e-code, then either company's DOT compliant housings. The E-code housings are EU specs and have a far superior light pattern. I'm not sure who all carries them but if you Google Daniel Stern Lighting he can get them. Naturally, price follows function...

icey756 · 09-09-2011, 03:13 AM

What is a DOT approved lighting fixture exactly cre? And would i have to ad a resister to that also? and what sizing should be used? Just need some ideas

cre · 09-09-2011, 07:03 PM

We're talking specifically about headlight enclosures for H4 bulbs, not what you're doing. DOT it the US Department of Transportation they're the ones who regulate the lighting standards and specify what is required for conformity for use on street. I Europe there are different standards (their newer headlight standards are better than DOT; known as E-Code or ECE).

New bulbs often makes a big difference in brightness just by itself.

icey756 · 09-09-2011, 08:59 PM

I kinda just want to do something to my car to make it stand out more. I would like to do a new paint job but i dont have the money for that right now. I just wanted to do something relatively cheap so i replaced my interior lights with while LED. I would still like to do something to the outside as well. Any ideas?

cre · 09-10-2011, 06:02 PM

The only LEDs you could put on the outside that'll make it stand out are:

1) The cheap LED bulbs in place of incandescents which every kid does to their car right away.
2) Under lighting which every 10th kid does.
3) OR converting to LED lighting and doing it well (I can think of about 5 people total who've done it on a MKIII and it's never easy... expense varies depending on resourcefulness).

Personally, I recommend you not wasting time on any mods until everything else is in excellent shape. Spend that time and energy flushing the coolant system thoroughly, replace transmission and differential fluids, replace shifter seat and bushing (if manual). Convert to fluidic windshield washers (the ones you find mounted to the wiper arm on Buicks and Cadillacs are nice, then you can delete the hood nipples. Replace the tiny driver's side footwell light bulb with LED light bars in both footwells. Do the same for the trunk light. Replace all vacuum hoses and test all VSVs. Get every little piece of maintenance done.

The easiest way to make sure you stand out with a MKIII is to make sure it's not always just standing there (broken down).

Their looks aren't so exotic that they aren't always confused for half a dozen other (lesser) vehicles... so forget about making a big splash with just some different bulbs which no one is going to notice anyway (unless you hang out in dark parking garages).

Of course there's always spray paint or roller paintjobs. :P

supraman3000 · 09-14-2011, 07:29 AM

In supramania a saw some guy do LED's on his mkIII but he did everything in led's he did it himself but it took him he said a whole winter but it was really worth it. THAT SH...WRITE..THR? THAT SH...I'L MAKE u DEFF!

09-09-2011, 02:29 AM	#2
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	The best housing would be the Cibie ECE (E-code) compliant housings, then Hella's e-code, then either company's DOT compliant housings. The E-code housings are EU specs and have a far superior light pattern. I'm not sure who all carries them but if you Google Daniel Stern Lighting he can get them. Naturally, price follows function... __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

09-09-2011, 03:13 AM	#3
icey756 3" Exhaust Join Date: Jun 2011 Location: Wisconsin Posts: 177	What is a DOT approved lighting fixture exactly cre? And would i have to ad a resister to that also? and what sizing should be used? Just need some ideas __________________ 1988 7M-GTE Manual Turbo, Godspeed IC, Stock HG Torque to 90FP W/ Arp bolts, Silicon water hose kit, silicon vacuum hoses, Godspeed radiator, 2 12" electric fans.

09-09-2011, 07:03 PM	#4
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	We're talking specifically about headlight enclosures for H4 bulbs, not what you're doing. DOT it the US Department of Transportation they're the ones who regulate the lighting standards and specify what is required for conformity for use on street. I Europe there are different standards (their newer headlight standards are better than DOT; known as E-Code or ECE). New bulbs often makes a big difference in brightness just by itself. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

09-09-2011, 08:59 PM	#5
icey756 3" Exhaust Join Date: Jun 2011 Location: Wisconsin Posts: 177	I kinda just want to do something to my car to make it stand out more. I would like to do a new paint job but i dont have the money for that right now. I just wanted to do something relatively cheap so i replaced my interior lights with while LED. I would still like to do something to the outside as well. Any ideas? __________________ 1988 7M-GTE Manual Turbo, Godspeed IC, Stock HG Torque to 90FP W/ Arp bolts, Silicon water hose kit, silicon vacuum hoses, Godspeed radiator, 2 12" electric fans.

09-10-2011, 06:02 PM	#6
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	The only LEDs you could put on the outside that'll make it stand out are: 1) The cheap LED bulbs in place of incandescents which every kid does to their car right away. 2) Under lighting which every 10th kid does. 3) OR converting to LED lighting and doing it well (I can think of about 5 people total who've done it on a MKIII and it's never easy... expense varies depending on resourcefulness). Personally, I recommend you not wasting time on any mods until everything else is in excellent shape. Spend that time and energy flushing the coolant system thoroughly, replace transmission and differential fluids, replace shifter seat and bushing (if manual). Convert to fluidic windshield washers (the ones you find mounted to the wiper arm on Buicks and Cadillacs are nice, then you can delete the hood nipples. Replace the tiny driver's side footwell light bulb with LED light bars in both footwells. Do the same for the trunk light. Replace all vacuum hoses and test all VSVs. Get every little piece of maintenance done. The easiest way to make sure you stand out with a MKIII is to make sure it's not always just standing there (broken down). Their looks aren't so exotic that they aren't always confused for half a dozen other (lesser) vehicles... so forget about making a big splash with just some different bulbs which no one is going to notice anyway (unless you hang out in dark parking garages). Of course there's always spray paint or roller paintjobs. :P __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

09-08-2011, 11:21 PM	#1
Sonyps307 Lexus & 550's Join Date: May 2010 Location: Baltimore Posts: 526	I would like to get real headlight housing. but I forgot the company that made them and where to get them. I know u already said the company on another headlight post but I can't find that also.

09-14-2011, 07:29 AM	#7
supraman3000 3" Exhaust Join Date: Feb 2011 Location: blackwood nj Posts: 55 Blog Entries: 1	In supramania a saw some guy do LED's on his mkIII but he did everything in led's he did it himself but it took him he said a whole winter but it was really worth it. THAT SH...WRITE..THR? THAT SH...I'L MAKE u DEFF!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cheap side marker to blinker mod.	El Supracabras	MKIII Supra	0	07-25-2011 02:27 PM
Occasional Clicking Sound (Blinker sound) coming from instrument cluster	Mike87	MKIII Supra	8	08-26-2010 02:29 AM