09-30-2005, 02:00 PM
|
#13 |
|
Lexus & 550's
Join Date: Apr 2005
Location: Bossier City LA
Posts: 556
 |
Well yeah, that was mentioned by someone earlier. The seals get soft and allows the fluid to blow by the seal on the piston inside the master cylinder. You can tell a lot of the times by just putting light pressure on the brake pedal and you can feel it go right to the floor. This doesn't always work, but many times that is one way to tell that it is an internal leak, or blow by. Usually you get some minor leakage into the brake booster.
Just go buy a brake master cylinder at Advanced auto or another parts store and put it on. Make sure you bleed the master cylinder first then the wheel cylinders. It wouldn't be a bad idea to make sure the fluid comes out clean on all the wheel cylinders so you have fresh fluid in the system. Keep us informed. Russ |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| ABS Problem? | rasclaat_98 | MKIII Supra | 6 | 12-13-2010 09:53 PM |
| speed sensor problem | nadircicek | Non-Generation Specific Questions | 8 | 10-09-2009 05:58 PM |
| found the problem | brs86supra | MKIII Supra | 0 | 05-02-2006 03:42 PM |
| Boost Problem, I Guess | nonstop213 | MKIII Supra | 0 | 02-23-2006 07:32 PM |
| tsp problem for na t supra | jdlee123 | MKIV Supra | 0 | 09-02-2005 06:01 PM |
Threaded Mode