TPS adjustments, unclear on voltage readings.

Nathaninwa TPS adjustments, unclear on... 06-18-2011, 03:06 AM

Nathaninwa I should say that the truck... 06-18-2011, 03:41 PM

Nathaninwa I have done some more google... 06-18-2011, 06:29 PM

Nathaninwa Just searched out that the... 06-18-2011, 10:52 PM

87hilux7mge i would offer an... 06-18-2011, 11:21 PM

Sonyps307 I was having the same proble... 06-19-2011, 01:30 AM

Nathaninwa Thanks for the link....I had... 06-19-2011, 07:12 AM

Nathaninwa More research on the VSS... 06-19-2011, 10:05 PM

cre Vc should be between 4.8v and... 06-20-2011, 03:12 AM

Nathaninwa Thankyou for the reply. In... 06-20-2011, 03:55 PM

cre The Crassida's intake is... 06-20-2011, 08:42 PM

Nathaninwa Do you think I would benefit... 06-20-2011, 09:13 PM

cre The ACIS system helps most... 06-20-2011, 09:50 PM

Nathaninwa Just looked at my pinout, and... 06-20-2011, 11:57 PM

cre VSV2 modulates the FPR's... 06-21-2011, 12:33 AM

Nathaninwa OK, so I just picked up an NA... 06-21-2011, 04:07 AM

cre Heh, I've got a bucket of... 06-21-2011, 05:20 AM

Nathaninwa Cool, I am headed to the yard... 06-21-2011, 05:47 AM

Nathaninwa After reading up on the ACIS... 06-22-2011, 01:40 AM

Sonyps307 I seen a guy use a TB from a... 06-22-2011, 02:50 AM

Nathaninwa I think I saw that right... 06-22-2011, 03:35 AM

87hilux7mge was that ever finished? i saw... 06-22-2011, 07:23 AM

cre Bigger throttle body on an... 06-23-2011, 01:38 AM

Nathaninwa I have never really looked... 06-23-2011, 01:47 AM

cre Yes, it quiets things down a... 06-23-2011, 02:43 AM

Nathaninwa Well I need one, so I think... 06-24-2011, 12:41 AM

Nathaninwa Bumping this thread since all... 01-20-2012, 04:32 PM

Nathaninwa I did some research and found... 01-21-2012, 01:23 AM

Nathaninwa So got the truck fired up... 01-22-2012, 04:25 AM

Nathaninwa Everything is good. i went... 01-23-2012, 12:37 AM

cre The air bypass in the AFM... 01-23-2012, 01:04 AM

06-24-2011, 12:41 AM	#26
Nathaninwa Intake Join Date: Jun 2011 Location: Aberdeen, WA Posts: 43	Well I need one, so I think Ill get that pacesetter header and give it a try. I got my 65mm throttle all done, well just need to weld on the fingers for the TPS, but it all fits up. Ill tune the AFM with a wideband and dial it all in as well. Im expecting my NA intake anyday. Do I need to make a vacuum canister to operate it, or just plum it into the plenum itself? I can take some 3 inch intercooler piping and cap the ends and tap for some fittings if need be. Im reading on that Hemholtz resonator....sounds very interesting.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are Off Refbacks are Off Forum Rules

Forum Jump

All times are GMT. The time now is 01:29 AM.