7mge to 7mte ?

johnvin · 03-08-2011, 04:48 PM

im i able to swap out the non turbo engein to the turbo ? it a 1988 , or would i have to get a turbo model wire harness

graywolf1969 · 03-08-2011, 11:23 PM

i did a jdm 7mgte swap to a usa 7mgte bc my engine was makeing noise from the top hafe and it died i had to swap the wireharness so it would work i think u do also your going to need the ecu too there ppl on here that can help u i think u have to but i could be rong

johnvin · 03-09-2011, 05:05 PM

ok thanks for the help bro !

supraluver4life · 03-09-2011, 06:37 PM

Wow you guys really need to learn how to type.

If you swap to a 7mgte you will need all the components of the engine like the coil packs, engine harness, ecu, afm, ignitor, etc.... Also depending on if you get the tranny with it (r154) you will need the pull type clutch, flywheel, pressure plate, and a new slave cylinder.

I have like three 7mgte's im parting out so let me know if your in need of anything and I'll see if i can help you out

03-08-2011, 04:48 PM	#1
johnvin 3" Exhaust Join Date: Sep 2010 Location: Clayton WI Posts: 75	7mge to 7mte ? im i able to swap out the non turbo engein to the turbo ? it a 1988 , or would i have to get a turbo model wire harness

03-08-2011, 11:23 PM	#2
graywolf1969 Intake Join Date: Mar 2011 Location: kentucky Posts: 42	hey i did a jdm 7mgte swap to a usa 7mgte bc my engine was makeing noise from the top hafe and it died i had to swap the wireharness so it would work i think u do also your going to need the ecu too there ppl on here that can help u i think u have to but i could be rong

03-09-2011, 06:37 PM	#4
supraluver4life 3" Exhaust Join Date: Nov 2009 Location: Santa Fe, NM Posts: 135	Wow you guys really need to learn how to type. If you swap to a 7mgte you will need all the components of the engine like the coil packs, engine harness, ecu, afm, ignitor, etc.... Also depending on if you get the tranny with it (r154) you will need the pull type clutch, flywheel, pressure plate, and a new slave cylinder. I have like three 7mgte's im parting out so let me know if your in need of anything and I'll see if i can help you out __________________ Cusco front, Tein Rear coilovers Massive DDP, 3'' custom catless exhaust, Tsudo muffler 4.5'' outlet, Apexi cold air intake, Act stage 3 clutch, ct26 turbo (stock)- 10psi +300rwhp "Not driving a car because its too nice, is like not fucking your gf so shes still tight for the next guy"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7MGE Build	PaintballFTW	MKIII Supra	6	02-20-2012 06:06 PM
7mge hp increase info	907mge	MKIII Supra	14	02-05-2011 03:03 AM
7MGTE to 7MGE	karu	MKIII Supra	4	10-22-2010 07:22 AM
7mgte to 7mge conversion help	wayzhack	MKIII Supra	7	09-07-2010 08:22 PM
7MGE Head Swap	7MGTE87	MKIII Supra	3	03-27-2010 06:39 AM

03-09-2011, 05:05 PM	#3
johnvin 3" Exhaust Join Date: Sep 2010 Location: Clayton WI Posts: 75	ok thanks for the help bro !