|
|
|
|
#1 |
|
Lexus & 550's
Join Date: Aug 2005
Location: In the shadows
Posts: 506
![]() |
actually mine did not work at all when i got my car and i had to take the driving light switch apart and clean the contacts, then looking at it all i did was solder on a jumper piece of brass to modify what get powered by the toggle bar inside the switch. so now when i turn on parking lights, i can run driving lights too or just driving lights, and when i turn on headlights the drivers lights go off. then if i turn my headlights on hi beam they automatically turn on driver lights. or i can flip the switch and they will come on with low beam and go off with hi beam. not sure what its supposed to do stock, but i like this setup. if you want i can take a picture of what i did to the switch inside?
just ask.. Last edited by joel williams; 09-15-2005 at 09:42 PM. Reason: typo error |
|
|
|
|
|
#2 |
|
3" Exhaust
Join Date: Aug 2005
Posts: 193
![]() |
If u can i'd appreciate it, i don't know if it makes a difference between the 88 model and the 89 cuz mine is a 88
|
|
|
|
|
|
#3 |
|
12psi boost
Join Date: Jul 2005
Posts: 348
![]() |
Mine come on as long as the key is on, I use em as DRL's
|
|
|
|
|
|
#4 |
|
Lexus & 550's
Join Date: Aug 2005
Location: In the shadows
Posts: 506
![]() |
ok now that i have it apart i think it would be easier to just jumper the top two wires together instead of pulling the switch apart but i am not 100 percent sure. here is the best pik i can offer. its the back of the switch and the odd color brass on the top right corner is the piece i added. it basically conects the top two terminal or wires together. if you do take the switch apart, be carefull not to lose the spring and ball bearing in the opposite side. let me know if this help ya
|
|
|
|
|
|
#5 |
|
3" Exhaust
Join Date: Aug 2005
Posts: 193
![]() |
Can anybody tell me where exactly the f/l relay is located and a description would be much appreciated...
|
|
|
|
|
|
#6 |
|
Stock
Join Date: Apr 2006
Location: USA
Posts: 27
![]() |
i found some pictures of the rewire. http://photos.dylanwiggins.com/thumbnails.php?album=66
that should help ALOT
__________________
7m-ge auto tranny non turbo so far stocked .. |
|
|
|
|
|
#7 |
|
Lexus & 550's
Join Date: Feb 2006
Location: Canton, OH
Posts: 536
![]() |
i did this a long time ago and only got one foglight to work after the rewireing. does anybody know why? i put it all back together, because i wanted both of my foglights back, and none of them worked
i might try it again with jaysun's link with sweet detail |
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| My brake lights are stuck on. wtf! | Isphius | MKIII Supra | 16 | 09-07-2009 08:48 PM |
| LF: Lightbulbs guide | lamw001 | MKIV Supra | 2 | 09-18-2008 02:23 PM |
| Brake lights not working! | lifesnotfair | MKIII Supra | 18 | 05-05-2008 11:40 PM |
| Dash lights and Side marker lights are not working | ebang | MKIII Supra | 0 | 04-01-2008 12:35 PM |
| tail lights out need help! | supraman121 | MKIII Supra | 5 | 12-21-2006 09:16 PM |