JDM Engines

nailhead432 · 05-15-2010, 11:12 PM

The biggest thing for me is to make sure that I'm getting EVERYTHING I need to do the swap. Sure, little brackets and hoses aren't much, but they do add up and can blow a budget to hell...been down that road before. I may not rebuild a used engine, but I would at the very least check the clearances on the main and rod bearings and reseal the engine unless problems were found. Like most people on here, I can't leave well enough alone and will eventually (if not immediately) start throwing performance parts on the car. Really I just wanna make sure that I'm not going to get shafted by some online dealer if I were to get the wrong stuff or an incomplete engine.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JDM 6MGE engines avilable	Supra Goddess	MKII Supra	12	03-27-2015 12:32 AM
Engines	GettaRobo	MKIII Supra	0	04-27-2010 05:36 PM
7mgte-1jz-mk engines	supraquest	Non-Generation Specific Questions	2	01-07-2009 07:46 PM
Why are JDM engines available at all?	finaltable	Non-Generation Specific Questions	3	06-09-2007 12:51 AM

05-15-2010, 11:12 PM	#7
nailhead432 Stock Join Date: Feb 2010 Location: Alabama Posts: 7	The biggest thing for me is to make sure that I'm getting EVERYTHING I need to do the swap. Sure, little brackets and hoses aren't much, but they do add up and can blow a budget to hell...been down that road before. I may not rebuild a used engine, but I would at the very least check the clearances on the main and rod bearings and reseal the engine unless problems were found. Like most people on here, I can't leave well enough alone and will eventually (if not immediately) start throwing performance parts on the car. Really I just wanna make sure that I'm not going to get shafted by some online dealer if I were to get the wrong stuff or an incomplete engine.