Machine Work Costs

907mge · 05-02-2010, 10:33 PM

I paid 500 to have the valves done, clean up ann smooth the ports and re check the shim/cam clearance.

Semper_Fi · 05-03-2010, 01:57 AM

Quote:

Originally Posted by 907mge

I paid 500 to have the valves done, clean up ann smooth the ports and re check the shim/cam clearance.

why so much man??? im paying 220 to get my head done by a mechanic who works strickly on race cars.

i was quoted at 900 for the engine being completely refurbished, but left open...
250 in gaskets for the entire engine, oil, and radiator fluid. Do the math friend.

907mge · 05-03-2010, 02:21 AM

He spent quite a few hours with the dremel cleaning out the ports. Did a very nice job of a light port n' polish. I had started on my own but decided to let someone who knows what there doing to finish it. And also he heil coiled some of the exhaust manifol studs. Plus he is a very short walk from my house.

Semper_Fi · 05-03-2010, 02:35 AM

Quote:

Originally Posted by 907mge

He spent quite a few hours with the dremel cleaning out the ports. Did a very nice job of a light port n' polish. I had started on my own but decided to let someone who knows what there doing to finish it. And also he heil coiled some of the exhaust manifol studs. Plus he is a very short walk from my house.

oh... makes sence. My guy is 30 minutes away... closest machine shop to me.

cre · 05-04-2010, 02:22 AM

P&P gets quite expensive. For general head work, tanking, valve stem seals, cam lash adjustment, valves lapped, dye inspection and vacuum testing will generally run between $200 and $400... it varies a LOT depending on where you are located as well as the skills of the shop.

05-04-2010, 02:22 AM	#5
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	P&P gets quite expensive. For general head work, tanking, valve stem seals, cam lash adjustment, valves lapped, dye inspection and vacuum testing will generally run between $200 and $400... it varies a LOT depending on where you are located as well as the skills of the shop. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
head spacer or machine work?	mattromey	MKIII Supra	6	11-21-2009 02:26 AM
can you make these work with a 1jz swap..?	JZA70dood	Non-Generation Specific Questions	0	08-12-2009 04:17 PM
Where do i look for machine shop?	Kevin	MKIII Supra	1	05-15-2009 05:57 AM
N20 and HeAd WoRk	Supra_87_mk3	Non-Generation Specific Questions	4	05-25-2007 03:09 PM
Dash lights Don't Work!!	supra67	MKIII Supra	0	08-10-2006 01:11 AM

05-02-2010, 10:33 PM	#1
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	I paid 500 to have the valves done, clean up ann smooth the ports and re check the shim/cam clearance.

05-03-2010, 02:21 AM	#3
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	He spent quite a few hours with the dremel cleaning out the ports. Did a very nice job of a light port n' polish. I had started on my own but decided to let someone who knows what there doing to finish it. And also he heil coiled some of the exhaust manifol studs. Plus he is a very short walk from my house.