|
|
03-25-2010, 09:19 PM
|
#1 |
|
Stock
Join Date: Dec 2009
Location: Seattle
Posts: 16
 |
So setting it the timing with jumper in. do i set it to 0 on the crank pulley and then pulling out the jumper it will set it self to 10 degree or 12 what ever it should be.
The idle is at 780 most to all the time. |
|
|
|
03-25-2010, 09:29 PM
|
#2 |
|
Stock
Join Date: Dec 2009
Location: Seattle
Posts: 16
|
just answered my own question on the timing issue. sorry
|
|
|
|
|
03-25-2010, 10:23 PM
|
#3 |
|
Stock
Join Date: Dec 2009
Location: Seattle
Posts: 16
|
If I just wanted to pass emission couldn't i turn to distributer up and call it a day?
Shane still would be looking into the problem but at least i would have a decent running car to drive. |
|
|
|
|
03-26-2010, 01:46 AM
|
#4 |
|
Stock
Join Date: Dec 2009
Location: Seattle
Posts: 16
|
checked my temp sensor and it is fine. also when the car idles and just sits there the idle is 780 and moisture out the back. never really stops.
|
|
|
|
|
04-09-2010, 04:39 PM
|
#5 |
|
Stock
Join Date: Dec 2009
Location: Seattle
Posts: 16
|
So i clocked my distributer up and I set my throttle higher and I received the exact same score. Give or take 2 points. Could this be a bad cat? It ran for a while with the head blown, because I have now had it tested with the engine set 3 different ways and received the exact same score. This is confusing the hell out of me.
Shane |
|
|
|
|
04-16-2010, 12:15 AM
|
#6 |
 Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
 |
The advance timing is controlled by the ECU. Manually adjusting the timing only affects the system in a few circumstances. Find and fix the problem, there's no cheat.
Have you checked your spark plugs?
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal.  Tip Jar --->  |
|
|
|
|
04-18-2010, 04:17 AM
|
#7 |
|
Intake
Join Date: Jan 2009
Location: Scottsdale, AZ
Posts: 42
|
Yeah check the plugs for sure. Fix that damn idle, take it to someone who can tell you what it is. When you get the idle fixed let me know because there is a cheat.... THERE IS ALWAYS A CHEAT!
Your choice but this is what I put in mine after doubling the standards at emmissions. On half a talk I poured a bottle of rubbing alcohol in the tank. ZIP!!!!! PRESTO!!!!!!! Alcohol is unlike gas in the fact that it burns pure and complete leaving no unburned and impure gas behind. Better suggestion yet...... when you are almost out of gas completely run A COUPLE GALLONS OF DE-NATURED ALCOHOL Thanks for you time ladies and gentlemen....class dismissed! hahaha j/k always wanted to say that  anyway let me know how the works for ya! 
__________________
87' 7M-GE Custom fab 3" Headers, Cat-Delete, 4" High Flow Flowmaster (WTF!!!!  ) MAF Adapter with truck sized Spectre filter. NGK Laser Platinum Plugs. K&N Oil Filter87' 1JZ-GTE Truck sized Spectre Air filter, Walbro 255LPH Fuel Pump, GM Fuel Pressure Regulator, Welded Rear end gears, Targa Top, 3" Intercooler kit, aluminium intercooler, Ebay boost controller, Ebay Oil-Catch can, I HAVE POWER STEERING AND A/C :P K&N 2JZ Oil filter, Catrol Syntec 10w-40 Fully synthetic oil
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| emissions FYI | ddmcse | MKIII Supra | 0 | 02-01-2008 12:34 PM |
| Went through Emissions today.... | IHateHacks | MKIII Supra | 32 | 07-03-2007 07:31 PM |
| Emissions | gorillaguy8 | MKIII Supra | 10 | 04-10-2007 12:33 AM |
| Emissions | drmmr15 | MKIII Supra | 1 | 01-19-2007 04:09 PM |
| Emissions? | Luvs2slide | MKIII Supra | 3 | 06-03-2006 11:55 AM |
Hybrid Mode
