upgrading intercooler and pipes: General Questions

reydio · 01-31-2010, 07:22 AM

Your best bet is to take off the front bumper and take a look at your existing set up. From there you can pretty much visualize what you need to do, to fit your larger intercooler.

Green7mgte · 02-01-2010, 01:10 AM

would like to get my specs in w/o dissembling if its at all possible.

right now im trying to find a set of pipes that would work. going 2.5 instead of 3. smaller is better fitting. Anyone know the pipe specs for a 2.5 inlet/outlet inter cooler.. how many pipe bends of what degree, that sorta information will be quite valuable. im in the process of comparing found data. but one kit to the next offers completely separate bends and number of pipes. wish I could find a site that says "hey you. you need THIS!"
who here changed out their inter cooler with a 2.5 inlet/outlet. what type of pipes did you use. how many pipes and what were the degree of bends that fit your stock routing locations w/o major modification.
also what are the core dimensions of the 7mgte stock inter cooler. that would be helpful. probably come across it tho once i start looking for it.

thanks

BlueTuner · 02-01-2010, 01:34 AM

what kind of intercooler are you getting. I Know that HKS has an intercooler kit that is a direct fit replacement over the stock one.

Green7mgte · 02-01-2010, 01:35 AM

Quote:

Originally Posted by BlueTuner

what kind of intercooler are you getting. I Know that HKS has an intercooler kit that is a direct fit replacement over the stock one.

prolly for like 500 tho right? hah to much for my blood. got a link?

stock intercooler dimensions are 18x7x2 1/4

BlueTuner · 02-01-2010, 01:36 AM

Quote:

Originally Posted by Green7mgte

prolly for like 500 tho right? hah to much for my blood. got a link?

stock intercooler dimensions are 18x7x2 1/4

LOL not Even close, Take your price and triple it and your still off. HERES THE LINK

Green7mgte · 02-01-2010, 01:38 AM

Quote:

Originally Posted by BlueTuner

LOL not Even close, Take your price and triple it and your still off. HERES THE LINK

oh yea man i seen that.. pff no thanks! I went there to find specs so I could google / ebay the kit i would get.

Will these pipes fallow my stock IC pipe route
x2 45 degree
x2 90 degree
x2 180 degree
x2 straight.. 2.5"

hes a little more info on what i gathered doing some searching.
I heard that fitting a 32x12x3 will leave about 2.5" on either side. a tad large for my purpose. fits right up against the top tho.
25x11x3 fits w/o modifications. Im just looking for something better then stock. that fits w/o relocating parts or drilling larger holes for the pipes. anyone know of the dimensions and pipes for this?
If you search ebay for pipes there not gonna be direct fit. just random section of pipes that im going to have to cut and fit myself. not able to do this tho.

anyone use a universal intercooler + piping?

I suppose if I would get a universal kit I would have to Cut the pipes myself

Green7mgte · 02-02-2010, 01:35 AM

calls for a mod to delete this thread. its garbage. just basically me ranting.
thanks

02-01-2010, 01:10 AM	#2
Green7mgte Supra Forum Moderator Join Date: Nov 2009 Location: Green-Ohio Posts: 1,297	would like to get my specs in w/o dissembling if its at all possible. right now im trying to find a set of pipes that would work. going 2.5 instead of 3. smaller is better fitting. Anyone know the pipe specs for a 2.5 inlet/outlet inter cooler.. how many pipe bends of what degree, that sorta information will be quite valuable. im in the process of comparing found data. but one kit to the next offers completely separate bends and number of pipes. wish I could find a site that says "hey you. you need THIS!" who here changed out their inter cooler with a 2.5 inlet/outlet. what type of pipes did you use. how many pipes and what were the degree of bends that fit your stock routing locations w/o major modification. also what are the core dimensions of the 7mgte stock inter cooler. that would be helpful. probably come across it tho once i start looking for it. thanks __________________ 92 Ma71 7mGTE Auto. SafcII Supra FAQ Supra MKIII FAQ Classified Section guidelines :

02-02-2010, 01:35 AM	#7
Green7mgte Supra Forum Moderator Join Date: Nov 2009 Location: Green-Ohio Posts: 1,297	calls for a mod to delete this thread. its garbage. just basically me ranting. thanks __________________ 92 Ma71 7mGTE Auto. SafcII Supra FAQ Supra MKIII FAQ Classified Section guidelines :

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Product Review: Cooleeze Pipes	mkiiisupra	Shops & Part Reviews	2	02-11-2008 04:30 PM
IC pipes and heat wrap questions.	redmaro	MKIII Supra	0	09-26-2007 08:00 AM
intercooler pipes locations	RussianMK3	MKIII Supra	1	12-07-2006 04:33 PM

01-31-2010, 07:22 AM	#1
reydio Intake Join Date: Dec 2009 Location: Pearl City, HI Posts: 33	Your best bet is to take off the front bumper and take a look at your existing set up. From there you can pretty much visualize what you need to do, to fit your larger intercooler.

02-01-2010, 01:34 AM	#3
BlueTuner Intake Join Date: Nov 2009 Location: Englewood, Ohio Posts: 41	what kind of intercooler are you getting. I Know that HKS has an intercooler kit that is a direct fit replacement over the stock one.