Missing bolts in interior

mirage83 · 01-21-2010, 12:59 AM

Quote:

Originally Posted by BlueTuner

I have these two random holes in on where the bump behind the center console is. They have threads so its for bolts. Its one bolt hole on each side and they are about 6 inches behind the center console. I will try to get pictures up soon but its raining outside. If you can tell me what they are for and what size of bolts they are?

Sounds like the bolt-holes for the seatbelt and the seat-guide from what you're describing. Pictures would help lock that ID down if you get the chance.

cre · 01-21-2010, 03:03 AM

http://www.cygnusx1.net/Supra/Librar...spx?F=7104&P=1

See, 73013 and 73014. As Mr.Mirage said, they are part of the seat belt's anchor and they do need to be replaced if they are missing.

BlueTuner · 01-28-2010, 09:25 PM

From what i see thats not quite it. I finally got the pictures,

cre · 01-28-2010, 09:54 PM

Yep... the seat belt brackets are missing.

BlueTuner · 01-29-2010, 12:56 AM

are these for the rear seat belts or the front ones. Im guessing the rear because i dont have rear belts and do have front ones.

mirage83 · 01-29-2010, 01:43 AM

Guess again. The bolt holes in question are for your front seat belts, not the rear. It's the anchor point for that end of the belt receptacle as well as the guide bar that fit's into the housing on the inside edge of each front seat.

If you've got stock seat belts and the receptacle for the clip isn't anchored at this point on your transmission hump, they aren't installed properly.

BlueTuner · 02-04-2010, 01:53 AM

Ok so if i get new seats and seat belts which im planning to do soon means i wont need to worry about this and just get some bolts to screw in. But if i dont get new seats i need to get the items Cre pointed out?

01-21-2010, 03:03 AM	#2
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	http://www.cygnusx1.net/Supra/Librar...spx?F=7104&P=1 See, 73013 and 73014. As Mr.Mirage said, they are part of the seat belt's anchor and they do need to be replaced if they are missing. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

01-28-2010, 09:25 PM	#3
BlueTuner Intake Join Date: Nov 2009 Location: Englewood, Ohio Posts: 41	From what i see thats not quite it. I finally got the pictures, Last edited by BlueTuner; 01-28-2010 at 09:28 PM.

01-28-2010, 09:54 PM	#4
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Yep... the seat belt brackets are missing. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7M-GTE Head torques on stock bolts...	MA70-3.0GT	MKIII Supra	2	11-07-2009 04:58 PM
Nice Tan Interior	skatecboy45	Exterior , Interior, and Detailing	0	06-15-2009 10:22 AM
Changing Interior - What Should I Do?	supra3	Exterior , Interior, and Detailing	2	05-19-2008 08:07 PM
head gasket bolts	marc	MKIII Supra	6	10-23-2006 07:23 PM

01-29-2010, 12:56 AM	#5
BlueTuner Intake Join Date: Nov 2009 Location: Englewood, Ohio Posts: 41	are these for the rear seat belts or the front ones. Im guessing the rear because i dont have rear belts and do have front ones.

01-29-2010, 01:43 AM	#6
mirage83 12psi boost Join Date: Feb 2007 Location: Georgia Posts: 359	Guess again. The bolt holes in question are for your front seat belts, not the rear. It's the anchor point for that end of the belt receptacle as well as the guide bar that fit's into the housing on the inside edge of each front seat. If you've got stock seat belts and the receptacle for the clip isn't anchored at this point on your transmission hump, they aren't installed properly.

02-04-2010, 01:53 AM	#7
BlueTuner Intake Join Date: Nov 2009 Location: Englewood, Ohio Posts: 41	Ok so if i get new seats and seat belts which im planning to do soon means i wont need to worry about this and just get some bolts to screw in. But if i dont get new seats i need to get the items Cre pointed out?