I just got a supra turbo i need help please!!!

[cre]

That'd be pneumatic. And you're going to have a hell of a time reaching any of the studs with the engine in the car with it.

For my exhaust I just bought a Borla muffler and had a local shop make and hang the pipe and weld the muffler on. I think I spent $200 on the muffler and about $300 on the piping and welding.

I've been running a Koyo Aluminum racing rad for a 1JZ. You have to make a couple braces out of some aluminum stock and trim the lower bushings by a bit, but it's probably the least expensive option out there if you shop around and it works very well.

[bradenman1]

Originally Posted by cre

That'd be pneumatic. And you're going to have a hell of a time reaching any of the studs with the engine in the car with it.

For my exhaust I just bought a Borla muffler and had a local shop make and hang the pipe and weld the muffler on. I think I spent $200 on the muffler and about $300 on the piping and welding.

I've been running a Koyo Aluminum racing rad for a 1JZ. You have to make a couple braces out of some aluminum stock and trim the lower bushings by a bit, but it's probably the least expensive option out there if you shop around and it works very well.

Iv heard some bad things about minike around here and iv seen the welding their welder does. Its pretty shitty he left 3 holes in a buddy of mines exhaust all he did was hit it with a mig a few times and he's like there ya go. Leaving a crack arouns the muffler inlet wide open .

Hmm I may have to look into that. I was looking at the fluidlyne or what ever its called stock duel row replacement. Not sure about it though its pretty expensive lol

I was thinking about going maybe 1jz, or 2jz after this engine goes out (hopefully not anytime with thew next 6 months) but I have no clue where to get one and what all is needed to do a swap succesfully the first time lol

Speaking of rechasing threads I'm having powerfab rechase the threads on the turbo that I messed up. They got me boltsa I couldn't get ahold of them eareley enough this morning due to school, but ill see how they work. Ohh and I got my exhaust manifold : ) I'm going to have powerfab send it to therew ceramic coating people and have it coated before I install it. Ill keep you up todate with some pics soon. I have the valve coversa back on and replaced that 90 degree bend hose that goews around thew back of the block (pain in the ass!!) Hopefully it will work it looks a little cremped but not too much.

[cre]

I asked around and went to a small, privately owned shop for my exhaust.... look around, I'm sure there are plenty of options in your area. If you want to step things up a good bit more then insist on mandrel bends... it'll raise the price a good amount but the pipe is bent without and crushing along the inner curve so it flows even better. On 3" I don't really worry about it as long as they've got a GOOD pipe bender.

Yeah, Fluidyne's a good brand, also there's PWR. The Koyo is a single row, but it does an excellent job and, like I said, it's very affordable.

[bradenman1]

I have also been looking at this exhaust system

http://www.supramania.com/forums/sho...flers-amp-Cats

Its made in canada and they sell a re routed divorced downpipe also that looks really good. its got a nice sound with a modified magnaflow muffler.

heres a sound clip I found on you tube

http://www.youtube.com/watch?v=w2etxwvMAis

im pretty sure im going to get it just waiting for a reply from the owner of the store.