CT26 Wastegate Actuator

Cyto · 12-09-2009, 05:14 PM

Ok, well apparently I can't find this actuator.
http://cjsupra.kendra.com/graphics/C...t/CT26WstL.jpg

I bought this one not knowing that it needed that one.

http://cdn1.ioffer.com/img/item/124/...7GEgYHxg4K.jpg

Is the 2nd one the new version of the first one? or what?
Anyone know where I can buy the 1st one?

cre · 12-09-2009, 11:33 PM

The CT-26 was used in a few different Toyota vehicles including the MR2, Supra and Land Cruiser... The first one didn't look like a MKIII waste gate actuator to me to begin with and that was mentioned by another member in your thread.

The second one does look like a MKIII actuator, but you really don't know from just looks. I don't know of anyone who sell; Toyota doesn't sells OEM replacements. I know of venders who sell high end actuators that work with it with a custom adapter plate, but they generally run over $150... I think closer to $200.

Addendum to what I PM'd to you:

Here, I found you a relatively inexpensive universal... you just need to figure out how the heck to mount it: http://www.horsepowerfreaks.com/part.../Internal/2989 Then you'll need to take the turbo and wastegate to a shop (unless they have a CT-26 lying around; I doubt that'll be the case

) and have a mounting plate fabricated.

If your budget is tight, you only need a stock actuator and if you want a brand new actuator, I'd buy the one you found first and have it either modified or get an adapter plate built and the actuator arm modified... it'll be cheaper than buying the Turbonetics AND getting a plate built for it.

12-09-2009, 05:14 PM	#1
Cyto 3" Exhaust Join Date: Jul 2009 Location: USA Posts: 103	CT26 Wastegate Actuator Ok, well apparently I can't find this actuator. http://cjsupra.kendra.com/graphics/C...t/CT26WstL.jpg I bought this one not knowing that it needed that one. http://cdn1.ioffer.com/img/item/124/...7GEgYHxg4K.jpg Is the 2nd one the new version of the first one? or what? Anyone know where I can buy the 1st one? __________________ Proud owner of a 1988 Toyota Supra Turbo, 105k Miles, and great condition. I might have to sell it to help pay for school so here's the link. http://www.toyota-supra.info/forums/...html#post72357 Last edited by Cyto; 12-09-2009 at 10:01 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hks internal wastegate actuator	SUPRBAD	MKIV Supra	1	08-21-2009 09:25 PM
Wastegate?	drmmr15	MKIII Supra	19	01-16-2007 07:07 PM
boost on stock with ct26?	carlosemagana	MKIII Supra	8	12-31-2006 07:48 AM

12-09-2009, 11:33 PM	#2
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	The CT-26 was used in a few different Toyota vehicles including the MR2, Supra and Land Cruiser... The first one didn't look like a MKIII waste gate actuator to me to begin with and that was mentioned by another member in your thread. The second one does look like a MKIII actuator, but you really don't know from just looks. I don't know of anyone who sell; Toyota doesn't sells OEM replacements. I know of venders who sell high end actuators that work with it with a custom adapter plate, but they generally run over $150... I think closer to $200. Addendum to what I PM'd to you: Here, I found you a relatively inexpensive universal... you just need to figure out how the heck to mount it: http://www.horsepowerfreaks.com/part.../Internal/2989 Then you'll need to take the turbo and wastegate to a shop (unless they have a CT-26 lying around; I doubt that'll be the case ) and have a mounting plate fabricated. If your budget is tight, you only need a stock actuator and if you want a brand new actuator, I'd buy the one you found first and have it either modified or get an adapter plate built and the actuator arm modified... it'll be cheaper than buying the Turbonetics AND getting a plate built for it.