Tell you what then, seeing as you're getting this block all sorted & you've tipped money into it already then how does this sound?

Pick up a complete turbo car that's either been wrapped round a tree etc, or got a rod through it's belly but good blower, hopefully good head & all the electronics & other bits you need to convert to GTE spec?

Then get your man at the shop to drill the oil drain & flush the block as per cre, and instead of buying N/A pistons for whatever oversize the bores are at, just get Turbo ones.

That way you get a good as new (better than new bearing in mind overbore) block & all the kit you need to make a real GTE motor... Plus you'll have a certain amount of other spares from the wreck which you can either swap to your car if better, or sell off to make some of your outlay back.

If going turbo, I would definitely avoid boring the block unless it is absolutely required.

I recommend installing forged pistons and new stock rods (forged would be even better). Definitely install a GTE oil pump; it's a much higher flowing pump and you'll want it when you add oil cooler and turbo.

Later I would install upgraded injectors and swap in GTE electronics and upgraded fuel pump.

paint
 

Cre got a new avatar!! cool

so the build continues. just as promised my rebuild kit has come in. new pistons, gaskets, water pump and what-not. free 2 day shipping!!! $275

so due to this being my DD and my boss saying im gonna start work again soon, i decided to keep in N/A but going with Cre's advice i wont invest into this motor till i can get a new one and go turbo. after this build is dont ill invest in other things.

soo today im going to the machine shop so i can drop off the pistons and they can test the cylinders and give me my block back! sweeeet. new head still hasnt come back yet. oh and since me and the lady are going to repaint the body eventually...... we got busy


http://hphotos-snc3.fbcdn.net/hs042....9_198817_n.jpg

http://photos-a.ak.fbcdn.net/hphotos..._4499791_n.jpg
covers look pretty dang good

amazing having a girl that can wrench :drool:
http://c2.ac-images.myspacecdn.com/i...c3b781beb5.jpg

This is what I'm kinda planning myself... I have a N/A that will probably last me another year or two (I hope)... I hope to get my hands on a 7mgte by then and start (if not finish) the rebuild on it, so it's ready to drop in once the 7mge finally goes... I'm just having a hard time finding a 5 spd manual that comes with the 7mgte rather than seperate... but if seperate it has to be... hopefully I can accomodate that before the 7mge goes as well.

more paint
 

prep work
http://photos-b.ak.fbcdn.net/hphotos..._6077576_n.jpg

http://photos-c.ak.fbcdn.net/hphotos..._2963915_n.jpg

and paint :)
http://photos-e.ak.fbcdn.net/hphotos..._1885489_n.jpg

man feels like my girl is doing most of the work.....

my friend is talking about getting rid of his 1j and going 2j......

hmmmmm :naughty:

You've got that feeling too eh? http://www.fadingworld.com/Smilies/rofl.gif

hahaha man i should have read that before posting.......
:rofl:

block is here. still waiting on the head and Techniques . pics up soon.

movin along
 

man so this build is starting to get more and more intimidating. i just finished the block last night and the head should be in today. starting to get a little cold feet :p

oh yea, masking an engine is extremely easy and absolutely stress relieving.

http://c2.ac-images.myspacecdn.com/i...cb95e115e1.jpg

http://c3.ac-images.myspacecdn.com/i...7fc8417a82.jpg

http://c1.ac-images.myspacecdn.com/i...5c8d88eb7c.jpg
finished the coats at 1 am. :)

http://c1.ac-images.myspacecdn.com/i...87a3052b08.jpg

now i need to get puddy for the vacuum lines, bolts, and the crank. and im pretty sure im gonna need a butt load of grease for all these moving parts.....


almost done :crazy2:

delivery
 

head just came in. going to get the block ready tomorrow and throw it in. :) sweeeet :)