Speedo cable problems...

cre · 10-31-2009, 06:37 PM

It's possible that the one cable wasn't the only problem too. Also, it's possible that the crimp wasn't tight enough and the cable just isn't moving the end.

The speedo is easy enough to test, pull the cluster, and use a dowel (sanded square) in a drill to drive it. Remember, it won't read if you're running it backward.

With the cable a too long is better than a too short. 1/8" shouldn't matter, but 1/4" or more would. Are you sure it's securely mounted to the green basket (or whatever you want to call it)?

EDIT: When you pull the cluster to test the speedo, try turning the cable's spindle by hand... if it moves more than a quarter turn or so you probably have another break somewhere.

Raysupra · 11-01-2009, 03:47 AM

after looking at it. I had the needle attached before the female plastic mount behind the cluster. I bought a new kit since I already crimped the other nipple..should i post a new thread for my engine running to hot? right fluids.. Ill post if that fixed it tomorrow thanks for the help, the nipple fits into the odometer so it should work

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speedo cable broke. What next?	Busted Knuckles	MKIII Supra	5	10-25-2009 06:01 AM
Speedo Problems - Its not moving	Chambers	MKIII Supra	9	05-28-2007 08:40 PM
replacing speedo cable	damdog05	MKIII Supra	7	01-11-2007 04:35 PM
speedo cable	cwmart102	Non-Generation Specific Questions	2	03-08-2005 02:01 PM

10-31-2009, 06:37 PM	#1
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	It's possible that the one cable wasn't the only problem too. Also, it's possible that the crimp wasn't tight enough and the cable just isn't moving the end. The speedo is easy enough to test, pull the cluster, and use a dowel (sanded square) in a drill to drive it. Remember, it won't read if you're running it backward. With the cable a too long is better than a too short. 1/8" shouldn't matter, but 1/4" or more would. Are you sure it's securely mounted to the green basket (or whatever you want to call it)? EDIT: When you pull the cluster to test the speedo, try turning the cable's spindle by hand... if it moves more than a quarter turn or so you probably have another break somewhere.

11-01-2009, 03:47 AM	#2
Raysupra 3" Exhaust Join Date: Aug 2009 Location: Camp Lejeune Posts: 59	after looking at it. I had the needle attached before the female plastic mount behind the cluster. I bought a new kit since I already crimped the other nipple..should i post a new thread for my engine running to hot? right fluids.. Ill post if that fixed it tomorrow thanks for the help, the nipple fits into the odometer so it should work