7m build

two-step-n · 11-13-2009, 05:18 AM

Quote:

Originally Posted by evosupra

Nice clean job !

i like the power coat looks clean

86.5 7MGE · 11-13-2009, 06:43 AM

It looks great so far... Let me know how that AEM EMS works out for you because I am considering on purchasing one in the near future

two-step-n · 11-13-2009, 06:52 AM

my friend has a 88 toyota pick with a 7mgte swap we plugged the aem ems into it with a stock tune and wow its so crazy the thing you can do and so ez to uses make sure you get the plug-n-play tho unless you wanna do alot more work to install. its really cool all the settings and maps its nuts

cre · 11-13-2009, 06:57 AM

Quote:

Originally Posted by 86.5 7MGE

It looks great so far... Let me know how that AEM EMS works out for you because I am considering on purchasing one in the near future

You'll need to swap in all the GTE electronics. They don't make an AEM EMS for the GE. Not a huge deal, you'll still be able to tune for the N/A but the AEM is built to use the GTE's electronics and harness.

two-step-n · 01-16-2010, 07:12 AM

tonight i put the Oil Pump Hose AN-8 on with the new Oil Squirter Banjo Bolt! also the crank scraper from sip

Raysupra · 01-16-2010, 10:22 PM

Hey Looks great... Im about to Rebuild alot of stuff on my 7m. where you getting all the hoses for the intake and vaccum lines? and keep up updated on the build :-D Im interested how the Aem works

two-step-n · 01-17-2010, 06:40 AM

Quote:

Originally Posted by Raysupra

Hey Looks great... Im about to Rebuild alot of stuff on my 7m. where you getting all the hoses for the intake and vaccum lines? and keep up updated on the build :-D Im interested how the Aem works

thanks, i will keep updating! i got at the intake and vac lines from dyno comp a lil shop out here in az! good luck on your build!

two-step-n · 01-23-2010, 07:14 AM

so i had clutch doctor come out today and resurface my flywheel, they drive to you and its a flat rate of $42 bucks, i also got the clutch in the mail today now its finally time to drop her in!

11-13-2009, 06:43 AM	#2
86.5 7MGE 3" Exhaust Join Date: May 2009 Location: Denver Posts: 104	It looks great so far... Let me know how that AEM EMS works out for you because I am considering on purchasing one in the near future __________________ Cold Air Intake MIZU Aluminum Radiator Ralco RZ Underdrive Pulley NGK Wires and Plugs Hi Flow CAT MR Muffler Super Coil Techna Fit Brake lines Clear Corner Turn Signal Lens Projector Head Lights Evo Fog Lights Evo Body Kit Soon ---> 3'' Exhaust

01-16-2010, 07:12 AM	#5
two-step-n 3" Exhaust Join Date: Oct 2009 Location: mesa az Posts: 51	tonight i put the Oil Pump Hose AN-8 on with the new Oil Squirter Banjo Bolt! also the crank scraper from sip Attached Thumbnails

01-23-2010, 07:14 AM	#8
two-step-n 3" Exhaust Join Date: Oct 2009 Location: mesa az Posts: 51	so i had clutch doctor come out today and resurface my flywheel, they drive to you and its a flat rate of $42 bucks, i also got the clutch in the mail today now its finally time to drop her in! Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cannot build up boost :(	azerty	MKIII Supra	4	04-22-2009 03:56 AM
3.4 bored out stroked supra build	Fredy171787	MKIII Supra	2	04-12-2008 03:10 PM
Mad Carbon Build Up	supraman121	MKIII Supra	2	04-24-2007 04:22 PM
Engine build...	h8z2luze	MKIII Supra	5	12-08-2006 03:55 AM

11-13-2009, 06:52 AM	#3
two-step-n 3" Exhaust Join Date: Oct 2009 Location: mesa az Posts: 51	my friend has a 88 toyota pick with a 7mgte swap we plugged the aem ems into it with a stock tune and wow its so crazy the thing you can do and so ez to uses make sure you get the plug-n-play tho unless you wanna do alot more work to install. its really cool all the settings and maps its nuts

01-16-2010, 10:22 PM	#6
Raysupra 3" Exhaust Join Date: Aug 2009 Location: Camp Lejeune Posts: 59	Hey Looks great... Im about to Rebuild alot of stuff on my 7m. where you getting all the hoses for the intake and vaccum lines? and keep up updated on the build :-D Im interested how the Aem works