Need some help!

Tundo · 05-23-2009, 12:20 AM

Quote:

Originally Posted by 86.5 7MGE

From what I read in the other forums...I believe that the wiring harnesses are different.

I'm not talking about the engine harness, the car harness. If that's what you were thinking.

86.5 7MGE · 05-23-2009, 01:11 AM

Quote:

Originally Posted by Tundo

I'm not talking about the engine harness, the car harness. If that's what you were thinking.

Are you referencing this? Inside the where the clutch goes...it should be around where the fuse box is and might even be taped up.

Tundo · 05-23-2009, 01:51 AM

The connectors that plug into those switches, I cannot find, idk if these pics will help.

86.5 7MGE · 05-23-2009, 06:21 AM

I would look under the dash in the mess of wires to see if you can find the other end of it; also try looking on the side where the fuse box is. I sure that the wire would be under the dash some where. The CSS is used for your cruise control if it's not hooked in your just not goining to be able to engage your cruise control.

Tundo · 05-23-2009, 07:54 AM

Quote:

Originally Posted by 86.5 7MGE

I would look under the dash in the mess of wires to see if you can find the other end of it; also try looking on the side where the fuse box is. I sure that the wire would be under the dash some where. The CSS is used for your cruise control if it's not hooked in your just not goining to be able to engage your cruise control.

Yeah I ripped the Cruise control out about two years ago, it was broke anyways. Which one is the connector for the cruise control? thanks

86.5 7MGE · 05-23-2009, 03:27 PM

Quote:

Originally Posted by Tundo

Yeah I ripped the Cruise control out about two years ago, it was broke anyways. Which one is the connector for the cruise control? thanks

They both are for the cruise control. What happens is that when you press the clutch it detects that the clutch is being pressed and turns off the cruise control. And the other detects when the clutch is in it's normal position (not pressed) and it allows you to turn on the cruise control. The CSS is the one in the back of the clutch. Hope this helped you out some what

Tundo · 05-23-2009, 03:36 PM

Quote:

Originally Posted by 86.5 7MGE

They both are for the cruise control. What happens is that when you press the clutch it detects that the clutch is being pressed and turns off the cruise control. And the other detects when the clutch is in it's normal position (not pressed) and it allows you to turn on the cruise control. The CSS is the one in the back of the clutch. Hope this helped you out some what

Wait a minute, to start the car the computer needs to know that the clutch is pressed in, so if these are both for the cruise control...I'm lost lol...

05-23-2009, 06:21 AM	#4
86.5 7MGE 3" Exhaust Join Date: May 2009 Location: Denver Posts: 104	I would look under the dash in the mess of wires to see if you can find the other end of it; also try looking on the side where the fuse box is. I sure that the wire would be under the dash some where. The CSS is used for your cruise control if it's not hooked in your just not goining to be able to engage your cruise control. __________________ Cold Air Intake MIZU Aluminum Radiator Ralco RZ Underdrive Pulley NGK Wires and Plugs Hi Flow CAT MR Muffler Super Coil Techna Fit Brake lines Clear Corner Turn Signal Lens Projector Head Lights Evo Fog Lights Evo Body Kit Soon ---> 3'' Exhaust

05-23-2009, 01:51 AM	#3
Tundo Stock Join Date: Mar 2009 Location: Tampa Florida Posts: 9	The connectors that plug into those switches, I cannot find, idk if these pics will help.