Confused

86.5 7MGE · 05-24-2009, 04:07 AM

You should look up some threads about blown head gaskets in the forum there is one especially from Ihatehacks http://www.toyota-supra.info/forums/...ir-w-pics.html it's a long thread but pretty detailed along with pictures, that should get you started. And also if you have any more questions feel free to ask.

happysupraowner:) · 05-30-2009, 04:51 AM

Hey guys. So when I take the head off do I need to remove the timing belt or not need to fool with any of the belts? I've got the left side completely apart, gonna work on the fuel side tomorrow. Its not as bad as I was thinking it would be. Everything came apart fairly easy with it being a new block and all. If I can get some advice on that part it would be most appreciate

Thanks a bunch.

05-24-2009, 04:07 AM	#1
86.5 7MGE 3" Exhaust Join Date: May 2009 Location: Denver Posts: 104	You should look up some threads about blown head gaskets in the forum there is one especially from Ihatehacks http://www.toyota-supra.info/forums/...ir-w-pics.html it's a long thread but pretty detailed along with pictures, that should get you started. And also if you have any more questions feel free to ask. __________________ Cold Air Intake MIZU Aluminum Radiator Ralco RZ Underdrive Pulley NGK Wires and Plugs Hi Flow CAT MR Muffler Super Coil Techna Fit Brake lines Clear Corner Turn Signal Lens Projector Head Lights Evo Fog Lights Evo Body Kit Soon ---> 3'' Exhaust Last edited by 86.5 7MGE; 05-24-2009 at 04:11 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lost and Confused	mkiiisupra	MKIII Supra	7	12-30-2007 07:21 PM
Confused about gear box. plz help ASAP	ADZ23	MKIV Supra	1	12-01-2006 12:18 PM
Can't adjust timing...	Lunch2000	MKIII Supra	7	11-26-2006 04:09 AM
Man...Confused	Poptart	Non-Generation Specific Questions	2	06-27-2006 07:47 PM
confused	localreeper	Non-Generation Specific Questions	3	10-07-2005 12:25 PM

05-30-2009, 04:51 AM	#2
happysupraowner:) Intake Join Date: Apr 2009 Location: Bristol VA Posts: 33	Hey guys. So when I take the head off do I need to remove the timing belt or not need to fool with any of the belts? I've got the left side completely apart, gonna work on the fuel side tomorrow. Its not as bad as I was thinking it would be. Everything came apart fairly easy with it being a new block and all. If I can get some advice on that part it would be most appreciate Thanks a bunch.