|
![]() |
#2 |
3" Exhaust
Join Date: Mar 2006
Location: Michigan
Posts: 213
![]() |
![]()
it means get a downpipe and cat back or downpipe and go to an exhaust shop and have them bend some pipe to finish the exhaust if you want a cheap way. you can use a high flow cat or test pipe (just a straight through pipe) if you don't mind not having a cat. once you free up the exhaust you'll notice a power increase and faster spool.
|
![]() |
![]() |
![]() |
#4 |
3" Exhaust
Join Date: Mar 2006
Location: Michigan
Posts: 213
![]() |
![]()
that depends on how much your willing to spend. the downpipe can range from $100 (ebay) to $300+ including the turbo elbow (hooks on the back of the turbo connecting to the downpipe) and catbacks are $400+ and the exhaust shop could cost $100 - $200 for the pipes the test pipe $50-$100 and a muffler with a 3" inlet $100.
Cheap downpipe $100 turbo elbow $100 muffler $100 test pipe $50-100 exhaust shop pipes $100-200 Total $450-$600 roughly Right Way downpipe $300 catback $450 test pipe $100 Total $850 roughly do some research and figure out what you want out of your car. |
![]() |
![]() |
![]() |
#6 |
3" Exhaust
Join Date: Mar 2006
Location: Michigan
Posts: 213
![]() |
![]()
my bad i assumed you were turbo ( i should've asked) no you won't need a turbo elbow then. i'm not sure if its still called a downpipe if its n/a cuz it connects to the exhaust manifold not turbo so i'm not sure. my first supra was n/a and all i did to that was cut the cat off put in a test pipe and get a muffler and called it good. can't remember if n/a exhaust is 2" or 2.5"? i wouldn't worry about the exhaust then until you go turbo.
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Kill Board! | Isphius | Show n Tell | 95 | 01-25-2010 05:05 AM |
HELP PLEASE | Nick0887 | Non-Generation Specific Questions | 4 | 02-28-2009 07:26 AM |
Dream Offer | Karma_Supra | MKIV Supra | 22 | 10-17-2007 03:04 PM |
Supra or Nissan 300zx??? Whats Better?!!! | Ebark69 | MKIV Supra | 5 | 01-08-2006 09:06 PM |