Home / Toyota Supra Forums

Go Back   Toyota Supra Forums! Join the Supra forum! > Performance, Modification, and Maintenance Forums - for generation specific discussions > MKIII Supra

Reply
 
Thread Tools Display Modes
Old 04-21-2009, 12:29 AM   #1
skadaloz
3" Exhaust
 
Join Date: Mar 2008
Location: sumwhea in PA
Posts: 60
skadaloz is on a distinguished road
Default help, no start after replacing HG

like title says...i just replace my head and headgasket, cranks but not start....cranks freely like no combustion happening...fuel pressure is at 25-30 psi key on....has spark but looks weak....any clues would help
skadaloz is offline   Reply With Quote
Old 04-21-2009, 01:25 AM   #2
mirage83
12psi boost
 
Join Date: Feb 2007
Location: Georgia
Posts: 359
mirage83 is on a distinguished road
Default

Quote:
Originally Posted by skadaloz View Post
like title says...i just replace my head and headgasket, cranks but not start....cranks freely like no combustion happening...fuel pressure is at 25-30 psi key on....has spark but looks weak....any clues would help
Check your CPS alignment and the timing, CPS especially as it doesn't have to be off by much to keep the engine from running. While you're at it check the air-gap measurements on it, see what kind of shape it's really in.
mirage83 is offline   Reply With Quote
Old 04-21-2009, 05:54 AM   #3
h8z2luze
12psi boost
 
h8z2luze's Avatar
 
Join Date: May 2006
Location: Nor*Cal
Posts: 338
h8z2luze is on a distinguished road
Default

Go through once more make sure everything is connected. I had the same problem until I realized i hadn't reconnected my MAF sensor lol.
__________________
1989 Supra 7MGE MK3 5-speed project...
http://www.cardomain.com/ride/2385505
h8z2luze is offline   Reply With Quote
Old 04-21-2009, 01:59 PM   #4
Makz
Stock
 
Join Date: Apr 2009
Location: Russia, Krasnodar
Posts: 9
Makz is on a distinguished road
Default

Check the installation of cam position sensor.
__________________
ex '87 MA70 7M-GTE, A/T, targa, rhd
ex '87 GA70 1G-GTE, M/T, targa,rhd
now '90 JZA70, 1JZ-GTE(swap), M/T, targa, lhd
18 inch PIAA Rozza wheels, HKS blow-off, Apexi turbotimer, XTD stage 3 racing clutch, AEM air filter, JZA80 fuel pump, 4-piston Skyline GT-R front brakes, Blitz boost-controller, high performance exhoust system
Makz is offline   Reply With Quote
Old 04-22-2009, 12:52 AM   #5
skadaloz
3" Exhaust
 
Join Date: Mar 2008
Location: sumwhea in PA
Posts: 60
skadaloz is on a distinguished road
Default

i retrace everything(sensors/plugs/wires/vacuum), its all plug up and recheck timing and it was right on, readjusted cam sensor but where is the crank position sensor b/c i didnt remove crank pulley and lower timing cover at all b/c i just used my old timing belt
skadaloz is offline   Reply With Quote
Old 04-22-2009, 11:46 PM   #6
skadaloz
3" Exhaust
 
Join Date: Mar 2008
Location: sumwhea in PA
Posts: 60
skadaloz is on a distinguished road
Default

this is wat i got on my check engine light...

blink..blink.....blink..blink.....blink..blink.... .blink..blink..blink..blink

so is it code 22 and 24?
skadaloz is offline   Reply With Quote
Old 04-23-2009, 01:51 AM   #7
mirage83
12psi boost
 
Join Date: Feb 2007
Location: Georgia
Posts: 359
mirage83 is on a distinguished road
Default

That's what it reads to me, water temp sensor and air temp sensor. Check your wiring for them, hope that's all it is, a loose couple of connectors.
mirage83 is offline   Reply With Quote
Old 04-23-2009, 11:49 PM   #8
skadaloz
3" Exhaust
 
Join Date: Mar 2008
Location: sumwhea in PA
Posts: 60
skadaloz is on a distinguished road
Default

Quote:
Originally Posted by mirage83 View Post
That's what it reads to me, water temp sensor and air temp sensor. Check your wiring for them, hope that's all it is, a loose couple of connectors.
well got that fix...it was my water temp sensor, the wire to the plug was corroded and i touch it and fell off...so i rewire it and now no codes...but still wont start...so i redid the timing and redo the cps as what the TRSM says and still no start...sounds like it wanted to start but then just goes back to crankin fast...well ima try to recheck everything again and see if it starts
skadaloz is offline   Reply With Quote
Old 04-24-2009, 07:57 PM   #9
skadaloz
3" Exhaust
 
Join Date: Mar 2008
Location: sumwhea in PA
Posts: 60
skadaloz is on a distinguished road
Default

well just did a compression test and theres no compression....so i did a leak down test and 100% no leaks...its weird theres no compression but theres no leak on any of the cylinder?

Last edited by skadaloz; 04-24-2009 at 08:32 PM. Reason: more info
skadaloz is offline   Reply With Quote
Old 04-24-2009, 09:21 PM   #10
h8z2luze
12psi boost
 
h8z2luze's Avatar
 
Join Date: May 2006
Location: Nor*Cal
Posts: 338
h8z2luze is on a distinguished road
Default

Maybe you have bad rings or bad valves...
__________________
1989 Supra 7MGE MK3 5-speed project...
http://www.cardomain.com/ride/2385505
h8z2luze is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
87 Supra won't start RNEMESiS42 MKIII Supra 3 06-25-2011 06:30 PM
Car wont start hot carfanatic89 MKIII Supra 41 03-30-2009 10:58 PM
My car decides when it wants to start carfanatic89 MKIII Supra 16 02-12-2008 07:50 PM
Car Died...where to start? Jrew MKIII Supra 4 10-26-2007 02:19 PM
no start 87supraguy MKIII Supra 5 03-23-2006 07:31 AM


All times are GMT. The time now is 10:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

1986



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87