MK3 Cieling lights, easy but help...

Hiccups · 04-07-2009, 04:18 AM

I actually tried wiggling them and it worked. Problem is, I will put it all back together and the light works. But I guess it de-wiggles itself (lol) and doesnt work again. And getting the light cap off isnt exactly easy.

BTW is there a special way to get the bezel (cover) off the lights without just pulling? Cuz im marking it up a lil (slightly, but im a perfectionist)

Thanks for the help btw

TurboSupera · 04-07-2009, 03:18 PM

That's the exact problem I had. It really depends on how much work you want to put into it. I ended up just wedging a piece of cardboard and haven't had any problems. If that did work I was going to cut the wires and solder them on or solder on some quick connectors.

spudz29212MKIII · 04-14-2009, 04:27 PM

Its the piece of crap rivets. If you take it apart and put pressure on the rivets it usually will work. So i just re-wired them, easy fix and HERE is a whole article on this dome light issue.

04-14-2009, 04:27 PM	#3
spudz29212MKIII 3" Exhaust Join Date: Mar 2008 Location: Columbia, SC Posts: 69	Its the piece of crap rivets. If you take it apart and put pressure on the rivets it usually will work. So i just re-wired them, easy fix and HERE is a whole article on this dome light issue. __________________ Zach

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My brake lights are stuck on. wtf!	Isphius	MKIII Supra	16	09-07-2009 08:48 PM
LF: Lightbulbs guide	lamw001	MKIV Supra	2	09-18-2008 02:23 PM
Radio lights?	bills1988	MKIII Supra	5	08-23-2008 02:33 PM
Brake lights not working!	lifesnotfair	MKIII Supra	18	05-05-2008 11:40 PM
tail lights out need help!	supraman121	MKIII Supra	5	12-21-2006 09:16 PM

04-07-2009, 04:18 AM	#1
Hiccups Stock Join Date: Mar 2009 Location: PA Posts: 26	I actually tried wiggling them and it worked. Problem is, I will put it all back together and the light works. But I guess it de-wiggles itself (lol) and doesnt work again. And getting the light cap off isnt exactly easy. BTW is there a special way to get the bezel (cover) off the lights without just pulling? Cuz im marking it up a lil (slightly, but im a perfectionist) Thanks for the help btw

04-07-2009, 03:18 PM	#2
TurboSupera 3" Exhaust Join Date: Mar 2008 Location: Garden Grove, CA Posts: 106	That's the exact problem I had. It really depends on how much work you want to put into it. I ended up just wedging a piece of cardboard and haven't had any problems. If that did work I was going to cut the wires and solder them on or solder on some quick connectors.