knocking around 2000-3000rpms

kwnate · 03-23-2009, 03:35 PM

Forget the video, pull the motor and rebuild it.

mkIII supra turbo gav · 03-23-2009, 03:39 PM

you Americans love V8s rip out the sr8 6 and fit a v8

Bill UK · 03-23-2009, 09:38 PM

Read my post in this Link if you still have your old filter than cut it open to see if there’s is any bearing material inside.

Suprafreak · 03-24-2009, 05:33 AM

Quote:

Originally Posted by Bill UK

Read my post in this Link if you still have your old filter than cut it open to see if there’s is any bearing material inside.

yeah... i tried this yesterday and there were no signs of wear in the bearing. i read your post before...thanks..

ask92 · 03-24-2009, 02:48 AM

Quote:

Originally Posted by mkIII supra turbo gav

you Americans love V8s rip out the sr8 6 and fit a v8

at least we put bigger engines in ours instead of puting in smaller engines like they do in the UK :P

Suprafreak · 03-24-2009, 06:45 AM

Quote:

Originally Posted by kwnate

Forget the video, pull the motor and rebuild it.

nice....i live in washington too. bremerton washington. i go to everett sometimes

03-23-2009, 03:35 PM	#1
kwnate SP58GT Join Date: Jul 2005 Location: USA Posts: 633	Forget the video, pull the motor and rebuild it. __________________ Nate

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP PLEASE	Nick0887	Non-Generation Specific Questions	4	02-28-2009 07:26 AM
Knocking => rebuild.Parts suggestions?	azerty	MKIII Supra	0	05-27-2008 08:29 PM
Hard Engine Knocking	86SupraMan	MKIII Supra	10	09-14-2007 05:39 AM
Help with knocking on front end supra96	dini_the_owl	MKIV Supra	8	09-03-2006 10:24 PM
loud knocking	Supra2NR	MKIII Supra	22	07-01-2006 06:19 AM

03-23-2009, 03:39 PM	#2
mkIII supra turbo gav Stock Join Date: Mar 2009 Location: bowdon cheshire in the good old UK Posts: 7	you Americans love V8s rip out the sr8 6 and fit a v8

03-23-2009, 09:38 PM	#3
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	Read my post in this Link if you still have your old filter than cut it open to see if there’s is any bearing material inside.