Home / Toyota Supra Forums

Go Back   Toyota Supra Forums! Join the Supra forum! > Performance, Modification, and Maintenance Forums - for generation specific discussions > MKIII Supra

Reply
 
Thread Tools Display Modes
Old 11-24-2008, 11:00 PM   #1
supra4life1386
Stock
 
Join Date: Nov 2008
Location: ny
Posts: 9
supra4life1386 is on a distinguished road
Default 7mgte swap no spark

hi i just did a swap from a na to a 7mgte and i am not getting any spark a wiring diagram would be helpful i am positve the coil packs worked before i installed them if you need more details just let me know thanks kyle.

- i just found 3 wires that i do not know where they go to i do not know how to upload pictures so i put them on my cardomain website with more detailed information and colors of wires pictures ect. thanks please help i want to hear my hard work run Toyota supra 86.5 non turbo stock - rochester, New York

Last edited by supra4life1386; 11-25-2008 at 03:27 AM. Reason: new information
supra4life1386 is offline   Reply With Quote
Old 11-25-2008, 03:38 PM   #2
Supra Greg
3" Exhaust
 
Supra Greg's Avatar
 
Join Date: Sep 2008
Location: Florida
Posts: 64
Supra Greg is on a distinguished road
Default

need pictures of how you wired it in....

and try

MK3 TSRM On-Line
Supra Greg is offline   Reply With Quote
Old 11-26-2008, 04:11 AM   #3
supra4life1386
Stock
 
Join Date: Nov 2008
Location: ny
Posts: 9
supra4life1386 is on a distinguished road
Default

please check my car domain page i have pictures posted at the bottom of the page of the wires i have a lead that they mite go to a knock sensor because i only have one hooked up and there was no plug for the other one but the clear wire in the picture i am not sure where it go's as for the link you gave me my wiring harness is an 87 so i am not sure the that site will work because of the differences in the years
supra4life1386 is offline   Reply With Quote
Old 11-27-2008, 05:04 AM   #4
supra4life1386
Stock
 
Join Date: Nov 2008
Location: ny
Posts: 9
supra4life1386 is on a distinguished road
Default narrowing the problem

not that anyone is helping me but i want to keep the updates coming. me and mechanical friend who helped me with this whole process tried to solve the problem of the no spark. here are the facts. the wires i was confused about on my car domain site the clear one is to a knock sensor because the turbos have 2 and i dont have any plugged in at the moment which i do not believe would have to do with me getting spark. the smaller ones i am still unsure of. the plug for the speed sensor that goes to the tranny is not plugged in because i have a w 58 and not an R154 so i have no place to attach the plug. hope fully this does not have anything to do with my car not running either. we tested the plugs that go directly into the coil packs and they are getting power to the coil packs. the car did pop a couple times but it was very rare and , not consistent at all, so this means there was some spark at very rare pionts in trying to start the car but we checked spark plugs 1 and 6 and they are getting no spark. I am 100 % positive the coil pack worked when i took it out of the other car 2 weeks ago. IF somone could explain to me how the cam positioning sensor works it would be very helpful SOmebody please help
supra4life1386 is offline   Reply With Quote
Old 11-27-2008, 02:16 PM   #5
Busted Knuckles
12psi boost
 
Busted Knuckles's Avatar
 
Join Date: Dec 2007
Location: Atlanta
Posts: 300
Busted Knuckles is on a distinguished road
Default

As far as the knock sensors, the N/A only has one. The Turbo has two. I'm guessing you have the wrong wire harness, and it is not going to work well for you. Did the original engine use coil paks? My 7M-GE still has a distributor, and, therefor, needs a different ignition system to run coilpaks. You need to pull the ECM and wiring harness from the old car and transfer all of that to yours. A N/A ECM will not run a turbo engine well at all. I used to have a link to a proper N/A to turbo swap, and remember that all the N/A gear, including ECM, wiring harness, MAF sensor, et. al. needed to be swapped with it.
Busted Knuckles is offline   Reply With Quote
Old 11-27-2008, 07:57 PM   #6
supra4life1386
Stock
 
Join Date: Nov 2008
Location: ny
Posts: 9
supra4life1386 is on a distinguished road
Default

thank you for replying to my thread first off, and i did swap the wiring harness and ecm, and MAF, coil packs ignition , cam positioning sensor, intake, fuel rail with turbo injectors cam covers for the coil packs, everything that had to be swapped is swapped over off the other car. Right now i am leaning to maybe my timing is completly off but not sure because all we did was take the distrubuter out and put the cam positioning sensor in we did not alighn anything so i am going to try and see if it's the timing thanks again for replying
supra4life1386 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
No spark mystery on 7mgte jcgrant4 MKIII Supra 9 08-19-2009 06:21 PM
7mgte Swap SilverBullet05 MKIII Supra 3 07-17-2008 12:18 AM
1986.5 N/A Supra 7mgte swap Posey MKIII Supra 0 03-16-2006 01:15 AM
7mge motor to 7mgte; no motor swap boogum7 MKIII Supra 9 12-10-2005 04:19 PM
Japanese 7mgte motors? Advice in swap? mark3supra MKIII Supra 0 12-04-2005 09:13 PM


All times are GMT. The time now is 09:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

1986



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87