getting to the crankshaft

supramacist · 07-12-2008, 10:25 PM

How can you say felpro are good gaskets when for 12$ you can get the entire upper intake set for 12$????
They'll work if you use permatex copper.

You guys need to learn to go with toyota OEM and except no substitutes.
Unless you do you will never get off these forums to actually DRIVE your car.

azerty · 07-17-2008, 09:33 AM

So... I was thinking to get my intercooler cleaned up as well, but I have a problem... I don`t know how to get it out of the engine bay.
I looked it up in the TSRM but I haven`t find anything on this subject. Can anyone help me?
Also, do you know if there are aftermarket intercooler hoses out there for our cars?

Thanks.

Bill UK · 07-17-2008, 08:00 PM

Don’t forget to have that crankshaft crack tested before any regrind, especially if you had a shell spin. Some info here for intercooler cleaning/removal.

mkiiisupra · 07-17-2008, 11:37 PM

Toyota Supra MK3 Aluminum Shafts : Shaftmasters, Quality Parts and Service at a Great Price

TOYOTA - LEXUS - COOLEEZE

Good quality pipes for hte stock intercooler set up, long delay though

azerty · 07-30-2008, 10:30 PM

Sooo...
The engine is out, the transmision as well.
So I have looked at the clutch and I idn`t like what I saw.
It has to go, so I an thinking a new racing clutch, and maybe a light weight flyweel.
The question is witch one would you recomend?
What make and what model.
Did you get one? How was it for you?
What should I change also at this time?
Thanks.

azerty · 08-07-2008, 01:17 PM

OK...
Can someone please tell me what these are?

Thanks.

paulmicin · 08-07-2008, 01:33 PM

I believe one is for egr and the other is for the fuel pressure regulator.

07-17-2008, 09:33 AM	#2
azerty 3" Exhaust Join Date: Sep 2007 Location: Romania Posts: 96	So... I was thinking to get my intercooler cleaned up as well, but I have a problem... I don`t know how to get it out of the engine bay. I looked it up in the TSRM but I haven`t find anything on this subject. Can anyone help me? Also, do you know if there are aftermarket intercooler hoses out there for our cars? Thanks. __________________ 1988 yelow manual turbo targa HKS ssqv bov Hose Techniques silicon hoses Forge manual boost controller boost gauge K&N FIPK ACT clutch kit HD-G6 Fidanza lightened flyweel 550cc RC Injectors 255lph Walbro Fuel Pump LIPP Lexus AFM Replica 3" turbo back echaust with divorced downpipe and no cats. Aeromotive FPR Aem Uego Wideband Gauge+O2 sensor

07-17-2008, 08:00 PM	#3
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	Don’t forget to have that crankshaft crack tested before any regrind, especially if you had a shell spin. Some info here for intercooler cleaning/removal. Last edited by Bill UK; 07-17-2008 at 08:06 PM.

07-17-2008, 11:37 PM	#4
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: Las Vegas, NV Posts: 570 Blog Entries: 1	Toyota Supra MK3 Aluminum Shafts : Shaftmasters, Quality Parts and Service at a Great Price TOYOTA - LEXUS - COOLEEZE Good quality pipes for hte stock intercooler set up, long delay though __________________ 1990 Toyota Supra Turbo A/T ------------------------------------------------ Questions about oil? take a look http://www.supramania.com/aehaas/

07-30-2008, 10:30 PM	#5
azerty 3" Exhaust Join Date: Sep 2007 Location: Romania Posts: 96	Sooo... The engine is out, the transmision as well. So I have looked at the clutch and I idn`t like what I saw. It has to go, so I an thinking a new racing clutch, and maybe a light weight flyweel. The question is witch one would you recomend? What make and what model. Did you get one? How was it for you? What should I change also at this time? Thanks. __________________ 1988 yelow manual turbo targa HKS ssqv bov Hose Techniques silicon hoses Forge manual boost controller boost gauge K&N FIPK ACT clutch kit HD-G6 Fidanza lightened flyweel 550cc RC Injectors 255lph Walbro Fuel Pump LIPP Lexus AFM Replica 3" turbo back echaust with divorced downpipe and no cats. Aeromotive FPR Aem Uego Wideband Gauge+O2 sensor

08-07-2008, 01:17 PM	#6
azerty 3" Exhaust Join Date: Sep 2007 Location: Romania Posts: 96	OK... Can someone please tell me what these are? Thanks. __________________ 1988 yelow manual turbo targa HKS ssqv bov Hose Techniques silicon hoses Forge manual boost controller boost gauge K&N FIPK ACT clutch kit HD-G6 Fidanza lightened flyweel 550cc RC Injectors 255lph Walbro Fuel Pump LIPP Lexus AFM Replica 3" turbo back echaust with divorced downpipe and no cats. Aeromotive FPR Aem Uego Wideband Gauge+O2 sensor

07-12-2008, 10:25 PM	#1
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	How can you say felpro are good gaskets when for 12$ you can get the entire upper intake set for 12$???? They'll work if you use permatex copper. You guys need to learn to go with toyota OEM and except no substitutes. Unless you do you will never get off these forums to actually DRIVE your car.

08-07-2008, 01:33 PM	#7
paulmicin 3" Exhaust Join Date: Oct 2007 Location: Norwalk, Ca Posts: 52	I believe one is for egr and the other is for the fuel pressure regulator. __________________ 1989 5 speed turbo Koyo radiator Spearco intercooler HKS bov Greddy e-01 boost controller 245's all around Slotted + drilled all around 3" straight piping turbo-back, 4" tip Lowering springs HKS mushroom air filter

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Locking the Crankshaft	go.stfu	MKIII Supra	4	07-14-2007 02:41 PM
crankshaft!!?	ethan12510	MKIII Supra	6	04-07-2007 06:44 AM