07-06-2005, 03:58 PM
|
#11 |
|
500whp yet?
Join Date: Jun 2005
Location: CT U.S.A.
Posts: 966
 |
A.you have no idea where this guy set the timing at
B. it might be avanced too far C. it's easier to check the timing than pull the knock sensor you need a timing light maybe 25 bucks you attach the red line to the postive on the battery you attach the black line to the negative on the battery or a proper ground then you attach the clip onto spark plug #1 ...#1 is closest to the radiator you are supposed to short out the ecu as if checking for codes and you look at the main pulley with blinking light pointed at the main pulley (while the engine is running) 10 degrees off TDC is recommend spec . other than that i guess you could replace the knock SENORS i would exhaust all other options 1st what is the exact error code you are getting do you have a shop manual ? have you looked at the manuals online ?
__________________
300+ RW HP Dyno run, jdm,mod turbo,3"exh,electfan,greddyboost Blown HeadGasket info My Supra KiXGaS |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Picture Of Knock Sensor Locations | ravenmaster | MKIII Supra | 10 | 01-31-2012 03:37 PM |
| turbo? Knock sensor? running lean? | west_side_supra | MKIII Supra | 19 | 02-01-2009 07:28 AM |
| Knock sensor for an N/A. | rnoswal | MKIII Supra | 2 | 11-16-2005 05:12 PM |
| Knock sensor..........ebay. | rnoswal | MKIII Supra | 0 | 11-06-2005 07:24 PM |
| Bad Knock sensor | TWRViper | MKIII Supra | 5 | 08-31-2005 09:24 PM |
Threaded Mode