intake manifold

SilenceboneSupra · 02-26-2008, 02:56 AM

hhhmm its hard to find those but ive seen a few for the 7mgte on ebay
costed around $1050 for one so real expensive, the intake for jz is not the same as for the 7m engines, il contact the seller if he has any for the 7mge engine or if they can make one il let yah kno

dumbass · 02-26-2008, 06:11 PM

i looked on supramania and found a guy that does it and it looks good but i don't know if it was just for the turbo or not. Is there a difference or not? also what is the best tb for the n/a and where can i get one from for not to much money because well lets face it the military donesn't really pay all that much.

supramacist · 02-27-2008, 02:20 AM

It's a cressida engine you want.

Those are the only 7m's I have ever seen without what you are speaking of.

j3pz · 02-28-2008, 02:42 PM

to get a jz manifold to fit you will either need to make a custom lower piece or an adaptor. an adaptor would be cheaper by far, but the flow wont be as great. i really dont think that should be to big a concern on a na though. you still may need to get some custom work done to the manifold to make sure you can still get all the ports you need. as for tb's, im not to sure. maybe just the stock jz tb? idk

02-28-2008, 02:42 PM	#4
j3pz 500whp yet? Join Date: Nov 2005 Location: Mechanicsville, MD, US of A, 20659 Posts: 1,060	to get a jz manifold to fit you will either need to make a custom lower piece or an adaptor. an adaptor would be cheaper by far, but the flow wont be as great. i really dont think that should be to big a concern on a na though. you still may need to get some custom work done to the manifold to make sure you can still get all the ports you need. as for tb's, im not to sure. maybe just the stock jz tb? idk __________________ 88 N/A w/ 5spd - stock - not running, bhg 87 turbo/targa w/ 5spd- fidanza light weight flywheel, new oem slave cylinder, apexi air filter, no ac and no heat

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5mge intake manifold upgrade	Allen Crump	Non-Generation Specific Questions	1	11-02-2006 01:53 AM
intake manifold has coolant what did i do wrong?	91toy supra	MKIII Supra	6	09-16-2006 02:46 PM
Intake Manifold Spacer Group Buy!	Burn N' Up	MKIII Supra	23	01-11-2006 04:11 AM
n/a intake manifold	Chomper	MKIV Supra	0	12-11-2005 10:39 PM
custom intake manifold	j3pz	MKIII Supra	8	12-07-2005 06:23 PM

02-26-2008, 02:56 AM	#1
SilenceboneSupra 3" Exhaust Join Date: Oct 2007 Location: Aruba Posts: 113	hhhmm its hard to find those but ive seen a few for the 7mgte on ebay costed around $1050 for one so real expensive, the intake for jz is not the same as for the 7m engines, il contact the seller if he has any for the 7mge engine or if they can make one il let yah kno

02-26-2008, 06:11 PM	#2
dumbass Stock Join Date: Feb 2008 Location: ruffin, nc Posts: 8	i looked on supramania and found a guy that does it and it looks good but i don't know if it was just for the turbo or not. Is there a difference or not? also what is the best tb for the n/a and where can i get one from for not to much money because well lets face it the military donesn't really pay all that much.

02-27-2008, 02:20 AM	#3
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	It's a cressida engine you want. Those are the only 7m's I have ever seen without what you are speaking of.