problems problems problems....
 

aye... so cars runnin perfectly fine on friday, yet saturday i try to start her up, and she starts, hit about 1500 rpm then slowly drops, and stalls, me hitting the gas only kills it faster, ive checked resistances on my afm, and they match up with what it should be, so im pretty sure my afm is workin fine, my hose does have a tear that goes abt, 3/4 way around the pipe which ive actually put some silicone sealer on and duct taped it hopin it would seal it enough to see if that was the problem, but sadly that wasnt it. moving right along, the VTV in my engine bay is only connected on one side, and im not sure if its supposed to have a hose runnin on the other side or no, other than that im completly stumped, the vaccume hose blueprint on the hood of my car states it shouldnt be connected to anything, but im not so sure, any help would be greatly appreciated as im tryin to fix this, also im makin my own Cold Air intake such as to fix that stupid tear in the hose..

don't know if this helps, but after I did my Head Gasket, it was running like crap, found out that there was a wire that I hadn't connected, my clip was broken. It was about 4-6 inches behind the alternator and half-way down the engine block.

VTV only connects to a small filter, other than that though nothing.

Also did ya check ur codes? ;)

gonna check codes, and vaccume hoses, aswell im gonna replace the torn up intake pipeing,

if its possible for somone to link me the code reading thread and the pinout thread for a N/A supra, id really appreciate it

Cygnus X1 Home Page

The hose prolly wont fix your problem but good idea to go ahead and replace