Any tips for cleaning the engine bay?

89wna · 01-24-2008, 04:20 AM

GREASED LIGHTNING ! I used it . Its at autozone. Automotive grade. I didnt dilute it at all . Just spray on let sit for a bit then hose off. Be carful of electronics. Very strong stuff !

mkiiisupra · 01-28-2008, 06:59 AM

maybe ill try it, have had a hard time getting it clean.... All gunks did for me was make all my hoses have white speckels on them bah.... Simple Green or w/e its called did ok, but still left over alota stuff...

Anything good for polishing metal up, or returning black to hoses lol, whats good to wipe down silicone with?

any types of spray paint that are good for engine bays? how about any paints that help sheild things from heat?

some brackets and things look pretty beat up thinking of painting them, also want to try something to make the heat sheild around my turbo look better erm

btwilson86 · 01-28-2008, 07:26 AM

Some auto parts stores (like my local Kragen) have "engine block paint". Don't know if it has any heat-repelling additives, but I do know it's made to withstand high temperatures. Also have exhaust paint that may work for your heat shield.

zambini · 01-28-2008, 06:17 PM

using tire shine on black hoses works wonders! you can also go to a quarter wash place for a nice pressure wash if nothing else..

supramacist · 01-28-2008, 08:21 PM

Gold Nugget here Gents.
PB BLaster.

If you think you like wd40.
You won't after you use this stuff once.

Cleaning engine bays you spray this on and soak it and comeback later and wipe it off with a rag.

It's like wd40 but there's no water.
Everything you guys have mentioned...., basically.

PB BLAster covers it.
Just make sure you choose firm cans.
The old cans lack propellants.

01-24-2008, 04:20 AM	#1
89wna Stock Join Date: Jan 2008 Location: FL Posts: 5	GREASED LIGHTNING ! I used it . Its at autozone. Automotive grade. I didnt dilute it at all . Just spray on let sit for a bit then hose off. Be carful of electronics. Very strong stuff ! __________________ 7mge a/t custom air intake w/k&n custom headers&catback exhuast portmatched intake manifold & other minor engine mods susp. mods no a/c, no heat, no clutch fan slow enough so every one sees my mk3

01-28-2008, 06:59 AM	#2
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: Las Vegas, NV Posts: 570 Blog Entries: 1	maybe ill try it, have had a hard time getting it clean.... All gunks did for me was make all my hoses have white speckels on them bah.... Simple Green or w/e its called did ok, but still left over alota stuff... Anything good for polishing metal up, or returning black to hoses lol, whats good to wipe down silicone with? any types of spray paint that are good for engine bays? how about any paints that help sheild things from heat? some brackets and things look pretty beat up thinking of painting them, also want to try something to make the heat sheild around my turbo look better erm __________________ 1990 Toyota Supra Turbo A/T ------------------------------------------------ Questions about oil? take a look http://www.supramania.com/aehaas/ Last edited by mkiiisupra; 01-28-2008 at 07:05 AM.

01-28-2008, 07:26 AM	#3
btwilson86 Super Moderator Join Date: May 2007 Location: Billings, Montana Posts: 1,034	Some auto parts stores (like my local Kragen) have "engine block paint". Don't know if it has any heat-repelling additives, but I do know it's made to withstand high temperatures. Also have exhaust paint that may work for your heat shield. __________________ 1989 7MGTE R154 Targa Top White Package w/Blue Interior Driftmotion 57trim CT26, Upgraded Intercooler, 2.25" Hard Pipes, 3" Turbo Back Exhaust with Test Pipe, HKS VPC w/GM 3 bar MAP sensor, APEXi S-AFC, Walbro 255lph fuel pump, ProSport EVO Series Boost / Fuel Pressure / AFR gauges, Lotek a Pillar Gauge Pod, HKS Type 0 Turbo Timer, Eibach Lowering Springs, Tokico Illumina II TEMS struts, custom powder coated Motegi Racing TrakLite wheels

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine Help!	born2drv	MKIII Supra	9	02-01-2011 08:14 PM
problem seperating engine from manual tranny	Gengus	MKIII Supra	7	01-29-2008 12:10 AM
Keeping Engine Cool	mrnickleye	Supra FAQ	0	06-04-2005 10:02 PM

01-28-2008, 06:17 PM	#4
zambini Stock Join Date: Jun 2007 Location: kentucky Posts: 29	using tire shine on black hoses works wonders! you can also go to a quarter wash place for a nice pressure wash if nothing else..

01-28-2008, 08:21 PM	#5
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	Gold Nugget here Gents. PB BLaster. If you think you like wd40. You won't after you use this stuff once. Cleaning engine bays you spray this on and soak it and comeback later and wipe it off with a rag. It's like wd40 but there's no water. Everything you guys have mentioned...., basically. PB BLAster covers it. Just make sure you choose firm cans. The old cans lack propellants.