Turbocharging an N/A Motor

[Irish_Mechanic]

Originally Posted by Chambers

I did get the "couple of wires". lol. I have done a little wire harness work, but nothing like taking two chopped harnness and putting them back to gether, lol.

Ahh, wow, never considered or seen that. I would defiantly like to see it when it's done!!

YouTube - Colt 4g63T Vs evo8

1991 (for the one we did)Colt Chassis - $400
Wiring Harness For 2.0T - $150
2.0T W/Trans - $900
Intercooler - $400
Making Mr. Evo miss his $30,000....priceless

[Chambers]

WW, thats cool!!

[colin172]

Failte, Conas Ata Tu?

[Irish_Mechanic]

Originally Posted by colin172

Failte, Conas Ata Tu?

yo hablo pocito espanol. engles por favor

[n/a 2 turbo]

i did the same thing, i put a turbo on my 88 n/a first of all by the time you can have it running right it costs a bunch of money i still dont have mine running right.. you are going to need bigger injectors 550cc, definetly a hks headgasket and arp bolts, 255 walboro fuel pump, a ecu from a turbo supra the stock ecu cant compinsate trust me, and an afm off a turbo supra along with all the wires, honestly if i knew about all this i would have swaped with a turbo engine i'ts alot cheaper

[Irish_Mechanic]

Originally Posted by n/a 2 turbo

i did the same thing, i put a turbo on my 88 n/a first of all by the time you can have it running right it costs a bunch of money i still dont have mine running right.. you are going to need bigger injectors 550cc, definetly a hks headgasket and arp bolts, 255 walboro fuel pump, a ecu from a turbo supra the stock ecu cant compinsate trust me, and an afm off a turbo supra along with all the wires, honestly if i knew about all this i would have swaped with a turbo engine i'ts alot cheaper

did you try using an MAF translator? the MAF would more acurately read the incoming air and would even adjust the fuel curve on its own. i would think that if you just slapped a turbo and manifold on, you may encounter fuel cut. so, did you use an MAF translator and a larger MAF?

[n/a 2 turbo]

Originally Posted by Irish_Mechanic

did you try using an MAF translator? the MAF would more acurately read the incoming air and would even adjust the fuel curve on its own. i would think that if you just slapped a turbo and manifold on, you may encounter fuel cut. so, did you use an MAF translator and a larger MAF?

2 seconds before i read you're post i found out about a maf translator lol. do you have one? an does it work?