Home / Toyota Supra Forums

Go Back   Toyota Supra Forums! Join the Supra forum! > Performance, Modification, and Maintenance Forums - for generation specific discussions > MKIII Supra

Reply
 
Thread Tools Display Modes
Old 12-20-2007, 09:44 AM   #1
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default apexi safc? map ecu?

ok well i currently have the apexi safc in my car, wired up ready to go. well power house just sent me a free map ecu for making me wait on my new turbo manifold so now i'm wondering if i should just go ahead and put the map ecu in, from the looks of it, alot better way to run, i've heard of people running off of manifold pressure instead of maf sensor and getting much better results, plus the map sensor will get rid of that pesky maf sensor and give me less restriction.

now for the actual questions

who has ran this?

how do you like it?

there is a steel braided hose that came with the kit and i have no clue what it is do you?

any recommendations on were to put the map sensor? location on the manifold?

will this raise my fuel cut a little higher than 18psi?

and last but not least, this removes my MAF and will have no need for the safc anymore?

and if the case is that i go with this who will buy my safc and lexus maf?
__________________

7MGTE - 500hp never dyno'd
exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate
fidenza cam gears
intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/
fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator
transmission: Fidenza flywheel/ACT extreme kit
electronics: map ecu 1 / HKS EVC 9
gauges:boost,EGT,oil temp & pressure/aem AFR
west_side_supra is offline   Reply With Quote
Old 12-20-2007, 02:36 PM   #2
Chambers
walbro fp
 
Chambers's Avatar
 
Join Date: May 2007
Location: USA - Harford County, Maryland
Posts: 481
Chambers is on a distinguished road
Default

From what I understand, If the safc has options and settings for MAP then you can use it, but I'm not familiar with it, you just need to adjust the wiring harness and the fuel/air maps. As for most of the other stuff, I couldn't help you with, sorry.
__________________
Whats in the garage, well.... in the yard.

1986.5 Toyota Supra - NA - 5 spd
1986 Ford Ranger Lowrider - 5 spd
1984 Ford Ranger XLT - 7" Lift - 4X4 - Auto
"Stuck in the 80's"

Last edited by Chambers; 12-20-2007 at 02:40 PM.
Chambers is offline   Reply With Quote
Old 12-20-2007, 04:33 PM   #3
Supra2NR
1000whp postwhore
 
Supra2NR's Avatar
 
Join Date: Apr 2006
Location: Chi-Town
Posts: 1,643
Supra2NR is on a distinguished road
Default

I could use that lexus maf
Sux you don't live close to me
__________________
http://www.myspace.com/supra_2nr



Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol
Supra2NR is offline   Reply With Quote
Old 12-20-2007, 07:45 PM   #4
cyanide-is-a-way-out
3" Exhaust
 
Join Date: Jul 2007
Location: Burlington,Wa
Posts: 79
cyanide-is-a-way-out is on a distinguished road
Default

ill buy the safc since i already got the lexus maf and housing
cyanide-is-a-way-out is offline   Reply With Quote
Old 12-20-2007, 10:53 PM   #5
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default

well as for information on both items.

LEXUS MAF
90$ + shipping
housing and sensor
low mileage

Apexi safc
90$ + shipping
no damage that is see its in awesome condition and it works.
lots of extra wire.
__________________

7MGTE - 500hp never dyno'd
exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate
fidenza cam gears
intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/
fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator
transmission: Fidenza flywheel/ACT extreme kit
electronics: map ecu 1 / HKS EVC 9
gauges:boost,EGT,oil temp & pressure/aem AFR
west_side_supra is offline   Reply With Quote
Old 12-20-2007, 11:28 PM   #6
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default

and my cooleze accordian hose replacement will be for sale also i want to say 125$ + shipping but i have to look at my receipt
__________________

7MGTE - 500hp never dyno'd
exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate
fidenza cam gears
intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/
fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator
transmission: Fidenza flywheel/ACT extreme kit
electronics: map ecu 1 / HKS EVC 9
gauges:boost,EGT,oil temp & pressure/aem AFR
west_side_supra is offline   Reply With Quote
Old 12-21-2007, 04:57 AM   #7
Supra2NR
1000whp postwhore
 
Supra2NR's Avatar
 
Join Date: Apr 2006
Location: Chi-Town
Posts: 1,643
Supra2NR is on a distinguished road
Default

can you take a pic of the accordian hose?
__________________
http://www.myspace.com/supra_2nr



Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol
Supra2NR is offline   Reply With Quote
Old 12-21-2007, 07:46 AM   #8
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default

here is the closest pic i have of it right now, same with the maf

__________________

7MGTE - 500hp never dyno'd
exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate
fidenza cam gears
intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/
fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator
transmission: Fidenza flywheel/ACT extreme kit
electronics: map ecu 1 / HKS EVC 9
gauges:boost,EGT,oil temp & pressure/aem AFR
west_side_supra is offline   Reply With Quote
Old 12-21-2007, 07:48 AM   #9
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default

its a brand new hose, that is the closest its ever gotten to the motor itself, not 1 mile on it, still has the bolts in the holes.
__________________

7MGTE - 500hp never dyno'd
exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate
fidenza cam gears
intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/
fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator
transmission: Fidenza flywheel/ACT extreme kit
electronics: map ecu 1 / HKS EVC 9
gauges:boost,EGT,oil temp & pressure/aem AFR
west_side_supra is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ANY ONE EVERY USE A Apexi Boost Controller donutking MKIII Supra 1 10-07-2005 01:58 PM


All times are GMT. The time now is 02:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

1986



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87