Master reuild kit!!

tokis · 11-24-2007, 09:44 PM

Well I'm planning to rebuild my motor. So i came across this Master rebuild kit, but dont know if its a good kit. Has anyone tried this kit of heard of it?

http://www.enginepartsstore.com/servlet/Detail?no=565

west_side_supra · 11-24-2007, 10:17 PM

well thats pretty sweet little kit, but if you are wanting any performance that isnt the way to go, as for what i would buy extra, greddy timing belt, ARP head bolts/studs, and the HKS MGH. now i didnt see if it came with any pumps like the oil/water/power steering ect.. but other than that i'm using the same bearings :P thats really about it

tokis · 11-25-2007, 12:31 AM

I not trying to go to extreme. Just around 300 to 350 rwhp it does come with a new oil pump. But for the rest i got it, but whats a HKS MGH? is that kit a OEM stock part?i dont want know cheap aftermarket one

supramacist · 11-25-2007, 02:21 AM

You may be in over your head dude.

An mhg= metal head gasket
hks= brand of metal head gasket.

Not the cheapest shite around.
My 2.mm hks stopper mhg was right around 350 cash.

You need to do some research urgently.
Because this is a real good way for you to waste a car, not knowing what you are doing,

www.horsepowerfreaks.com

These guys have everything you need except for the torque wrench.

west_side_supra · 11-25-2007, 07:41 AM

i got my stopper for 150$ EBAY !!! lol its da shit. acually i think i have gotten almost everything through ebay and have probably saved about 2k$ i think the most expensive stuff i got were the JE pistons and eagle rods and the HKS EVC. other than that everything was almost 30%-50% off the retail prices. but i have ordered a couple things trough HPfreaks "turbonetics manifold and some hose's" and also Supra sport has been very nice also.

supramacist · 11-26-2007, 08:14 PM

Everytime I order something from ebay wich has been twice someone takes my money and I get no parts. I avoid that place like the plague.

11-24-2007, 09:44 PM	#1
tokis Stock Join Date: Nov 2007 Location: phoenix Posts: 19	Master reuild kit!! Well I'm planning to rebuild my motor. So i came across this Master rebuild kit, but dont know if its a good kit. Has anyone tried this kit of heard of it? http://www.enginepartsstore.com/servlet/Detail?no=565

11-24-2007, 10:17 PM	#2
west_side_supra 12psi boost Join Date: Sep 2006 Location: Marysville Washington Posts: 353	well thats pretty sweet little kit, but if you are wanting any performance that isnt the way to go, as for what i would buy extra, greddy timing belt, ARP head bolts/studs, and the HKS MGH. now i didnt see if it came with any pumps like the oil/water/power steering ect.. but other than that i'm using the same bearings :P thats really about it __________________ 7MGTE - 500hp never dyno'd exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR

11-25-2007, 07:41 AM	#5
west_side_supra 12psi boost Join Date: Sep 2006 Location: Marysville Washington Posts: 353	i got my stopper for 150$ EBAY !!! lol its da shit. acually i think i have gotten almost everything through ebay and have probably saved about 2k$ i think the most expensive stuff i got were the JE pistons and eagle rods and the HKS EVC. other than that everything was almost 30%-50% off the retail prices. but i have ordered a couple things trough HPfreaks "turbonetics manifold and some hose's" and also Supra sport has been very nice also. __________________ 7MGTE - 500hp never dyno'd exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How hard is the clutch master cylinder to replace?	the#1	MKII Supra	2	05-27-2016 04:32 AM
brake master cyl.	tak2099	MKIII Supra	2	08-19-2008 11:27 PM
Master rebuild?	h8z2luze	MKIII Supra	5	05-22-2007 05:16 AM
Maintenance brake and clutch master cylinder fluid	IHateHacks	MKIII Supra	1	04-18-2007 07:15 PM

11-25-2007, 12:31 AM	#3
tokis Stock Join Date: Nov 2007 Location: phoenix Posts: 19	I not trying to go to extreme. Just around 300 to 350 rwhp it does come with a new oil pump. But for the rest i got it, but whats a HKS MGH? is that kit a OEM stock part?i dont want know cheap aftermarket one

11-25-2007, 02:21 AM	#4
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	You may be in over your head dude. An mhg= metal head gasket hks= brand of metal head gasket. Not the cheapest shite around. My 2.mm hks stopper mhg was right around 350 cash. You need to do some research urgently. Because this is a real good way for you to waste a car, not knowing what you are doing, www.horsepowerfreaks.com These guys have everything you need except for the torque wrench.

11-26-2007, 08:14 PM	#6
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	Everytime I order something from ebay wich has been twice someone takes my money and I get no parts. I avoid that place like the plague.