'89 Supra - Fuse Panel

mrfixit01 · 06-20-2007, 08:14 PM

Fan motor stopped suddenly. No AC, defrost, etc. Manual states that the fuse is in the passenger kick plate. I found it, but it is impossible to reach without serious demo of dash and such. Manual also states that the circuit breaker can be reset by placing a pin or small object into the hole. Anyone ever done this? Is there an easier way to access the passenger kick plate fuse panel. Both of the environmental fuses are located there.

carfanatic89 · 06-23-2007, 09:44 AM

Take the screws out of the plastic rest petal on the far left, should take a phillips, behing it is a nut i think 10 mm take that off and the trim around the fuse panel should come off making it easier to reach the fuse panel, but the fuse panel is still hard to work with. when they built our cars they didnt think of actually changing fuses lol.
hope this helps

mrfixit01 · 06-23-2007, 05:18 PM

Thanks guy. Much appreciated

06-20-2007, 08:14 PM	#1
mrfixit01 Stock Join Date: Jun 2007 Location: Flower Mound, TX Posts: 3	'89 Supra - Fuse Panel Fan motor stopped suddenly. No AC, defrost, etc. Manual states that the fuse is in the passenger kick plate. I found it, but it is impossible to reach without serious demo of dash and such. Manual also states that the circuit breaker can be reset by placing a pin or small object into the hole. Anyone ever done this? Is there an easier way to access the passenger kick plate fuse panel. Both of the environmental fuses are located there.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
91 supra fuse help	thormx364	MKII Supra	0	01-29-2009 05:13 AM
Fuse Removal + Nice Supra Pic	jdbones	Non-Generation Specific Questions	0	01-28-2008 01:01 AM
Dream Offer	Karma_Supra	MKIV Supra	22	10-17-2007 03:04 PM
Need 1993 supra instrument panel part	jdbones	Non-Generation Specific Questions	0	06-03-2007 11:04 AM
WTB for 83 Supra - front panel sub-assy	Santafe66	MKII Supra	2	10-11-2006 05:00 AM

06-23-2007, 09:44 AM	#2
carfanatic89 3" Exhaust Join Date: Apr 2007 Location: Waco Posts: 164	Take the screws out of the plastic rest petal on the far left, should take a phillips, behing it is a nut i think 10 mm take that off and the trim around the fuse panel should come off making it easier to reach the fuse panel, but the fuse panel is still hard to work with. when they built our cars they didnt think of actually changing fuses lol. hope this helps

06-23-2007, 05:18 PM	#3
mrfixit01 Stock Join Date: Jun 2007 Location: Flower Mound, TX Posts: 3	Thanks guy. Much appreciated