Home / Toyota Supra Forums

Go Back   Toyota Supra Forums! Join the Supra forum! > Performance, Modification, and Maintenance Forums - for generation specific discussions > MKIII Supra > MKIII FAQ

Reply
 
Thread Tools Display Modes
Old 11-13-2009, 11:06 PM   #1
Bill UK
AEM EMS
 
Bill UK's Avatar
 
Join Date: Jul 2006
Location: UK
Posts: 891
Bill UK is on a distinguished road
Default

Locate the CPS with the cam pulleys as sown below, assuming you have already re-installed the can belt with the crank pulley set at zero (# 1 piston at top dead centre) and cam pulleys as in photo. Line up the hole and notch as marked with the red arrow on the CPS and insert into the head. You may find when the gear engages with camshaft helical gear the CPS shaft will rotate, I removing mine a few times to double check it hadn’t moved before nipping up the adjusting bolt. Its also worth replacing the O ring Toyota part # 90099-14018




018
Bill UK is offline   Reply With Quote
Old 02-04-2010, 03:49 AM   #2
cre

Toyota
Racing
Development
 
cre's Avatar
 
Join Date: Apr 2007
Posts: 5,038
cre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond repute
Default

Then to set the spark advance, warm the engine up to normal operating temperatures and follow the instructions below:

Click image for larger version

Name:	IG_020.jpg
Views:	2494
Size:	8.5 KB
ID:	2763

EDIT: for some reason that attachment didn't work so well.... here's a link to the TSRM page on it.
http://www.cygnusx1.net/Supra/Librar...aspx?S=IG&P=20

You MUST insert a jumper across T(E)1 and E1 in the diagnostic box when setting/checking the timing. Additionally, NO CODES can be present, the throttle MUST be fully closed and the A/C MUST be off... and the engine needs to be at normal operating temp. The timing is supposed to be at 10 degrees BTDC, the ECU will advance it further based on sensor feed back, it's not an old Chevy, advancing it further yourself will actually do NOTHING.
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum.

If you're so inclined I'm always more than happy to accept tips via PayPal.
Tip Jar --->

Last edited by cre; 02-11-2010 at 01:48 AM.
cre is offline   Reply With Quote
Old 08-03-2010, 03:06 AM   #3
Green7mgte
Supra Forum Moderator
 
Join Date: Nov 2009
Location: Green-Ohio
Posts: 1,297
Green7mgte is on a distinguished road
Default

More of the same

http://www.supras.com/06/techcenter/display.php?QID=85
__________________

92 Ma71 7mGTE Auto. SafcII
Supra FAQ
Supra MKIII FAQ
Classified Section guidelines :

Green7mgte is offline   Reply With Quote
Old 08-04-2010, 12:47 PM   #4
MA70-3.0GT
12psi boost
 
MA70-3.0GT's Avatar
 
Join Date: Oct 2009
Location: Crewe, England
Posts: 356
MA70-3.0GT is on a distinguished road
Default

Nice pic on Green's link of the turbo's CPS correctly aligned at TDC with the cover off, good double-check item if you're not sure it's gone in right...
__________________
'89 MA70 Supra GT aero 3.0turbo JDM, Rebuilt motor, K&N intake, 3" stainless turbo-back. New turbo and braided line kit...

'89 Honda NC27 400, NC23 cams, open pipe, PC36a shock & possibly Showa USD forks...

'83 Yamaha 29R XJ750E-II, number 69 off the line, only runner in the country? Original except Koni shocks

'95 Honda PC26 CB500R, Winter hack, hateful, trying to sell it
I'm not paranoid, they really ARE after me!!!
MA70-3.0GT is offline   Reply With Quote
Old 08-19-2010, 06:00 AM   #5
btwilson86
Super Moderator
 
btwilson86's Avatar
 
Join Date: May 2007
Location: Billings, Montana
Posts: 1,034
btwilson86 is on a distinguished road
Default timing belt tension

Everytime I messed with my timing belt, I pulled all slack out of the belt on the intake side, slipped the belt onto the gears (with them aligned properly), then let the tensioner take out all of the slack in the belt. Doing it this way allows all belt slack to be between the exhaust cam gear and crankshaft timing gear, meaning nothing will move while tensioning the belt.


Don't know if that's the right way to do things, but it's worked great for me and keeps it as a 1 man job
__________________
1989 7MGTE R154 Targa Top White Package w/Blue Interior
Driftmotion 57trim CT26, Upgraded Intercooler, 2.25" Hard Pipes, 3" Turbo Back Exhaust with Test Pipe, HKS VPC w/GM 3 bar MAP sensor, APEXi S-AFC, Walbro 255lph fuel pump, ProSport EVO Series Boost / Fuel Pressure / AFR gauges, Lotek a Pillar Gauge Pod, HKS Type 0 Turbo Timer, Eibach Lowering Springs, Tokico Illumina II TEMS struts, custom powder coated Motegi Racing TrakLite wheels

Last edited by Green7mgte; 08-19-2010 at 03:20 PM.
btwilson86 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
timing problem with knock robertsws MKIII Supra 1 09-04-2009 03:40 PM
Timing question Kevin MKIII Supra 3 07-10-2009 07:52 PM
setting timing on a GTE djalkyd MKIII Supra 0 03-19-2006 04:39 AM
Setting the timing?? Dejvid1785 MKIII Supra 0 02-16-2006 04:12 AM
Standard /static Timing setting WilliamBodie MKIII Supra 6 12-08-2005 11:35 AM


All times are GMT. The time now is 09:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

1986



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87