Cooling system question

thunder550 · 11-20-2006, 07:11 AM

Quote:

Originally Posted by dcrusupra

That upper radiator hose looks kinda old. Squeeze it. If it crunches then you'll need a new one. If not then just go about your business, lol. Good luck. How'd u figure out exhaust gases were coming out of the radiator?

Pulled the cap off the radiator and let the car idle for a few minutes, then I started getting bubbles out the cap, and I could smell fuel when I got close to the fill neck.

Anyway, here's the car. I didn't see an introduction section of the forum, so this will have to do. Bought it for $950, and I get a free parts car too, this thing is in damn good condition for how old it is.

thunder550 · 11-20-2006, 07:18 AM

Here's my other ride too, my 01 Chevy Silverado. I had a 6.0L supercharged motor in it but it's broke, and I'm working on building a 408 for it that will eventually get a nice turbo setup, probably somewhere around 15 psi. I'll be shooting for the 700-800 hp range, and hopefully low 11's or so in the 1/4.

Once the truck is done and I recover from the huge financial drain, I want to put and LS1 or LS2 with a 6-speed into the Supra. I think that would be pretty badass.

hangsupra · 11-25-2006, 02:55 AM

nice mk2....

thunder550 · 12-09-2006, 05:45 AM

Well I've been slowly working on the car, and found that the cylinder head was eroded away in a few places. Luckily the parts car had an engine with a good head on it, so I'm working on getting that one installed. Just haven't had a lot of time to mess with it unfortunately.

84 celicasupra · 12-17-2006, 12:53 PM

that is a nice supra there! body looks to be in very good shape for it's age! i usually see rust around the window on the hatch

11-20-2006, 07:18 AM	#2
thunder550 Stock Join Date: Nov 2006 Location: Phoenix, AZ Posts: 5	Here's my other ride too, my 01 Chevy Silverado. I had a 6.0L supercharged motor in it but it's broke, and I'm working on building a 408 for it that will eventually get a nice turbo setup, probably somewhere around 15 psi. I'll be shooting for the 700-800 hp range, and hopefully low 11's or so in the 1/4. Once the truck is done and I recover from the huge financial drain, I want to put and LS1 or LS2 with a 6-speed into the Supra. I think that would be pretty badass. __________________ 2001 Silverado - No engine...but soon to have a 408 stroker 1985 Supra - the DD, not currently running either

12-09-2006, 05:45 AM	#4
thunder550 Stock Join Date: Nov 2006 Location: Phoenix, AZ Posts: 5	Well I've been slowly working on the car, and found that the cylinder head was eroded away in a few places. Luckily the parts car had an engine with a good head on it, so I'm working on getting that one installed. Just haven't had a lot of time to mess with it unfortunately. __________________ 2001 Silverado - No engine...but soon to have a 408 stroker 1985 Supra - the DD, not currently running either

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cooling system Oddity	skatecboy45	MKIII Supra	4	07-30-2008 09:38 PM
anti-lock brake system abs question	linuxgurupodboy	Non-Generation Specific Questions	0	09-30-2007 03:06 AM
high pressure in cooling system	jarekt	Non-Generation Specific Questions	3	09-01-2007 06:39 PM
burping the cooling system from air bubbles	suprra_girl	MKIII FAQ	2	04-19-2007 05:40 AM
Cooling system problem	vancouver874	Non-Generation Specific Questions	2	07-17-2006 03:43 PM

11-25-2006, 02:55 AM	#3
hangsupra 12psi boost Join Date: Jan 2005 Location: 209 area in cali. Posts: 397	nice mk2....

12-17-2006, 12:53 PM	#5
84 celicasupra Stock Join Date: Oct 2006 Location: york Posts: 12	that is a nice supra there! body looks to be in very good shape for it's age! i usually see rust around the window on the hatch