03-18-2006, 07:20 AM
|
#2 |
|
3" Exhaust
Join Date: May 2005
Location: STL ,MO.
Posts: 206
 |
They are only refering to the brake parts as a 5m engine because that was the only motor available..You stock brake system will hold up to a 7m conversion..You cant swap over the MKIII discs because the suspension is completly diferent, but you can get some slotted or cross drilled rotors for your car..Then upgrade to a MKIII master cylinder because they give more braking pressure..You might also want to get some braided stainless brake lines while your at it..Ive heard that you can swap out to 300Z disc's and calipers though..To find out exactly go to www.celicasupra.com and search for 300z brakes...If you need to find some of the rotors i was talking about go to www.rabidchimp.com Aarron keeps all the good stuff on hand.. Good luck on your project..
__________________
83 p-type,5spd,4;10 gears,New 86 cressida 5MGE 195hp,HKS metal head gasket,Cressida injectors,d-port intake runners,No EGR,No cat,Tweaked MAF,Custom cold air intake,Custom rear strut bar,Perfection clutch,Custom 3inch exhaust,4inch bazooka muffler,,Only 2700lbs,, COME AND GET IT!IF YOU DARE!! Please no Honduuuuhhhs!!! http://www.cardomain.com/ride/858848/2 |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 7MGTE to 7MGE | karu | MKIII Supra | 4 | 10-22-2010 07:22 AM |
| Two Issues: Front Brakes and Sporadic Vibration | Chambers | MKIII Supra | 0 | 11-03-2007 04:15 PM |
| 7mgte front clip | supraman121 | MKIII Supra | 4 | 05-31-2007 01:27 PM |
| 7mgte and 7mge question | supraman121 | MKIII Supra | 2 | 01-12-2007 09:09 PM |
Threaded Mode