know any CAMS?

super83 · 03-12-2010, 02:55 AM

anyone know a good cam choice to go with on a 5M, looking for a little umph to put into the 5M before i swap it out later, i was thinkin that come better cams would do and sadly not as much is offered for the 5 as everything is for the 7, thanks.

midwestmk2 · 03-13-2010, 03:39 AM

If you can get ahold of some HKS ones or some GUDE regrinds you should get what you are looking for.. There also have been some guys who have theirs reground to their own spec you will just have to source out a company who will or can do it.. There are some who have shaved the cam towers just to increase the valve lift and gain some power but you will have to reposition the tensioner a little more than stock to make up for the slack in the timing belt..

03-12-2010, 02:55 AM	#1
super83 Stock Join Date: Mar 2010 Location: Oregon Posts: 24	know any CAMS? anyone know a good cam choice to go with on a 5M, looking for a little umph to put into the 5M before i swap it out later, i was thinkin that come better cams would do and sadly not as much is offered for the 5 as everything is for the 7, thanks.

03-13-2010, 03:39 AM	#2
midwestmk2 3" Exhaust Join Date: May 2005 Location: STL ,MO. Posts: 206	If you can get ahold of some HKS ones or some GUDE regrinds you should get what you are looking for.. There also have been some guys who have theirs reground to their own spec you will just have to source out a company who will or can do it.. There are some who have shaved the cam towers just to increase the valve lift and gain some power but you will have to reposition the tensioner a little more than stock to make up for the slack in the timing belt.. __________________ 83 p-type,5spd,4;10 gears,New 86 cressida 5MGE 195hp,HKS metal head gasket,Cressida injectors,d-port intake runners,No EGR,No cat,Tweaked MAF,Custom cold air intake,Custom rear strut bar,Perfection clutch,Custom 3inch exhaust,4inch bazooka muffler,,Only 2700lbs,, COME AND GET IT!IF YOU DARE!! Please no Honduuuuhhhs!!! http://www.cardomain.com/ride/858848/2

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7mge cams	mk3000	MKIII Supra	0	09-12-2007 08:28 PM
n/a cams in a turbo 7m	kidthunder650	MKIII Supra	6	04-09-2007 12:48 PM
na cams on a 7mgte	noa324	MKIII Supra	0	09-04-2006 12:11 AM
Looking for good adjustable cams	SupraSaver87	Non-Generation Specific Questions	3	08-05-2006 08:43 PM
cams	supraboy8809	MKIII Supra	2	01-13-2006 08:18 PM