09-26-2005, 03:38 PM | #1 |
SP58GT
Join Date: Jun 2005
Location: Dirty Jerz
Posts: 691
|
valves
hey jeff, what kind of valves you got for an mk3? im lookin to change the ones i got right now...let me know
__________________
Now: Saving for an MKIV Broken Rides: (Sold) 91 supra turbo 5speed with a 1jzgte motor 421whp 400(399) ft*lbs of torque on tap @ 15 psi "Always outnumbered, never outgunned." |
09-26-2005, 07:13 PM | #2 |
HPF
Join Date: Sep 2005
Location: Portland, OR (USA)
Posts: 20
|
For the 7M Ferrea, Manley, or Toyota I'm not sure about the 1JZ, will have to check
|
09-26-2005, 07:19 PM | #3 |
SP58GT
Join Date: Jun 2005
Location: Dirty Jerz
Posts: 691
|
sorry, i forgot to mention it was for the 1jz...hard to find parts for a motor that isnt too common in the states, thanks
__________________
Now: Saving for an MKIV Broken Rides: (Sold) 91 supra turbo 5speed with a 1jzgte motor 421whp 400(399) ft*lbs of torque on tap @ 15 psi "Always outnumbered, never outgunned." |
09-27-2005, 04:21 PM | #4 |
SP58GT
Join Date: Jun 2005
Location: Dirty Jerz
Posts: 691
|
also i just got enough money to hopefully upgrade the brakes, if you could gimme any info on any mk3 brake kits that would be great, also let me know the sizes and the brake pad compounds and if the rotors are slotted or drilled or both...and if possible can u send me the clamping force of the calipers? thanks jeff, any information would be great
__________________
Now: Saving for an MKIV Broken Rides: (Sold) 91 supra turbo 5speed with a 1jzgte motor 421whp 400(399) ft*lbs of torque on tap @ 15 psi "Always outnumbered, never outgunned." |
09-27-2005, 05:56 PM | #5 |
HPF
Join Date: Sep 2005
Location: Portland, OR (USA)
Posts: 20
|
I'm checking on the valves, but on the brakes I'd go with the Precision Bakes kit. They make a 13" front and rear kit, and a 14" front and rear kit. The rotors are 2-piece and can be blank, drilled, slotted, or drilled & slotted for no extra charge. The 13" kit has 4-piston calipers front and rear, while the 14" kit has 6-piston front and 4 piston rear calipers.
13" Pricing: $1299 front kit, (there is a group-buy on the rear kit through Raptor Racing right now) 14" Pricing: $1750 front kit, $1625 rear kit A number of guys also do the 13" front kit and the stock MKIV tt rear brakes. Other brake kits include Brembo (~$3000 front only), Endless (~$2800 front only), KVR, etc |
09-29-2005, 02:35 PM | #6 |
SP58GT
Join Date: Jun 2005
Location: Dirty Jerz
Posts: 691
|
ill probably get the 14'' on teh front since im running 17's but im not sure if it will fit...for the precision brakes that is...hmm i forgot about using the mk4 tt rear rotors....might be a good idea...might save me so money...lemme know bout them valves though...thanks jeff
__________________
Now: Saving for an MKIV Broken Rides: (Sold) 91 supra turbo 5speed with a 1jzgte motor 421whp 400(399) ft*lbs of torque on tap @ 15 psi "Always outnumbered, never outgunned." |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Noisy Valves | spudz29212MKIII | MKIII Supra | 5 | 01-22-2009 03:37 AM |
about valves | cyanide-is-a-way-out | MKIII Supra | 2 | 10-03-2007 03:08 PM |
Valves, Cams,& the works | carfanatic89 | MKIII Supra | 6 | 06-06-2007 04:02 AM |
1jz valves | XTREMESUPRA | MKIII Supra | 0 | 01-17-2007 09:49 PM |
Do the MK3's have blow off valves? | XKeyLocX | MKIII Supra | 5 | 01-30-2006 07:06 PM |